Redragon K725LBY-RGB-PRO GLINTSTONE PRO: driver, software, screen, Bluetooth, and 2.4 GHz in Windows 11/10

Last Updated on 18.09.2026 by DriverNew

Redragon K725LBY-RGB-PRO GLINTSTONE PRO is a compact 96% mechanical keyboard with a numeric keypad, screen, multifunction knob, and three connection modes: USB-C, 2.4 GHz, and Bluetooth.

A separate Redragon system driver is not required for normal text input: Windows automatically uses standard HID drivers. The proprietary software is required for additional functions — macros, key remapping, RGB, and screen configuration.

Part 1. Installing Redragon K725LBY-RGB-PRO

Is a separate driver required?

No. A special Redragon system driver is not required for basic keyboard operation.

1. Connect the keyboard to the computer.
2. Wait a few seconds.
3. Windows will automatically detect the HID device.
4. Open any text editor.
5. Check letters, numbers, Enter, Backspace, and Space.

If the keyboard types normally, the standard HID driver is already installed.

There is no need to look for a universal “K725 driver” or use third-party automatic driver update programs.

Which software to install

K725LBY-RGB-PRO uses two official names for the same installer:

Redragon_K725-RGB-PRO_Setup_v2.0_20250221_V1.exe

and:

Redragon_K725-RGB-PRO_Software.exe

Testing showed that these files are completely identical: their size, SHA-256 hash, and byte-for-byte contents match.

There is no need to install both files.

Where to download the software

Use the official Redragon software catalog:

Redragon Software

Find K725LBY-RGB-PRO Gaming Keyboard in the list.

A separate download page is also available:

Redragon K725LBY-RGB-PRO Gaming Keyboard

Windows warning when starting the EXE

The tested v2.0 installer does not contain a standard embedded Authenticode signature. Therefore, Windows or security software may display an additional warning.

Do not disable Microsoft Defender, SmartScreen, or your antivirus just for the installation.

Before starting, make sure that:

• the file was downloaded from the official Redragon website;
• K725LBY-RGB-PRO is the selected model;
• the installer was not obtained from an unknown website;
• you are not using firmware from another K725 version.

Connection modes

Connecting via USB-C

1. Switch the keyboard to wired mode.
2. Connect the USB-C cable.
3. Connect the other end directly to the computer.
4. Wait for Windows to detect the device.
5. Check text input.

Wired mode is best for the initial Software installation, screen configuration, and diagnostics.

Connecting via 2.4 GHz

1. Switch the keyboard to 2.4 GHz mode.
2. Connect the included USB receiver.
3. Wait a few seconds.
4. Check text input.

Re-pairing 2.4 GHz

Bluetooth: three profiles

First Bluetooth pairing

1. Switch the keyboard to Bluetooth mode.
2. Select BT1, BT2, or BT3.
3. Hold the corresponding Fn+1, Fn+2, or Fn+3 combination for about 3 seconds.
4. Open Bluetooth in Windows.
5. Start adding a new device.
6. Select the keyboard.
7. Complete the pairing process.

Installing the software in Windows 11

1. Connect K725LBY via USB-C or 2.4 GHz.
2. Check normal input.
3. Download the official Software v2.0.
4. Close Redragon programs for other devices.
5. Run the EXE file.
6. Complete the installation.
7. Keep the keyboard connected.
8. Start Redragon Software.

Installing the software in Windows 10

1. Connect the keyboard via USB-C or 2.4 GHz.
2. Wait for Windows to detect the HID device.
3. Check normal input.
4. Run the official installer.
5. Complete the installation.
6. Start the software while the keyboard is connected.

The software displays Device not detected

If the keyboard types normally but the software does not detect it:

1. If Bluetooth is being used, switch to USB-C or 2.4 GHz.
2. Close Redragon Software.
3. Connect the keyboard directly to the computer.
4. Try another USB port.
5. Do not use a USB hub.
6. Make sure that the K725-RGB-PRO v2.0 package is installed.
7. Close Redragon programs for other keyboards.
8. Start Software again.

Reinstalling the software in Windows 11

1. Open Settings → Apps → Installed apps.
2. Find Redragon Software.
3. Click the three-dot button.
4. Select Uninstall.
5. Restart the computer.
6. Connect K725LBY via USB-C.
7. Install the official package again.

Reinstalling the software in Windows 10

1. Open Settings → Apps → Apps & features.
2. Find Redragon Software.
3. Click Uninstall.
4. Restart the computer.
5. Connect the keyboard via USB-C.
6. Install the official Software again.

Part 2. Configuring Redragon K725LBY-RGB-PRO

Switching between Bluetooth devices

What the screen is used for

The K725LBY screen is used to display and change supported keyboard settings. Depending on the mode, it may show connection status, time, battery level, graphics, and other information.

In different manufacturer materials, the screen may be referred to as LCD or OLED.

Multifunction knob

The knob is used to control the volume and navigate the on-screen menu.

1. Rotate the knob to change the volume or the selected setting.
2. Press the knob to open the menu.
3. Rotate it to select the required item.
4. Press it to confirm the selection.

What can be configured using the screen and software

• RGB;
• brightness;
• effect speed;
• time;
• Windows/Mac mode;
• custom graphics or GIF;
• other supported screen settings.

How to upload your own GIF

1. Connect K725LBY via USB-C.
2. Start Redragon Software.
3. Open the screen or GIF settings section.
4. Select a supported file.
5. Start the transfer.
6. Do not disconnect the USB cable.
7. Wait for the process to finish.
8. Check the image on the screen.

The GIF does not upload

1. Use a USB-C connection.
2. Close and restart the software.
3. Check whether K725LBY is detected.
4. Try a simpler test GIF.
5. Do not disconnect the keyboard until the transfer is complete.

The time on the screen is incorrect

1. Check the Windows system date and time.
2. Connect the keyboard via USB-C.
3. Start Software.
4. Open the screen time settings.
5. Perform synchronization.

RGB configuration

Redragon Software can be used to change supported:

• RGB effects;
• colors;
• brightness;
• speed;
• individual key settings;
• decorative lighting.

For hardware RGB key combinations, refer to the markings on your specific keyboard layout and the manual specifically for K725LBY.

RGB does not change

1. Make sure the software has detected the keyboard.
2. Switch from Bluetooth to USB or 2.4 GHz.
3. Change one setting.
4. Apply it.
5. Close and restart the software.

Configuring macros

1. Connect K725LBY via USB-C or 2.4 GHz.
2. Start Redragon Software.
3. Open the macro editor.
4. Create a short test macro.
5. Record several keystrokes.
6. Configure delays if necessary.
7. Assign the macro to a supported key.
8. Apply the changes.
9. Check the result.

The Windows key does not work

Windows / Mac mode

If system or multimedia keys work incorrectly, check the selected operating system mode before reinstalling the driver or software.

Factory Reset

The keyboard turns off the backlight by itself

Press any key to wake the keyboard.

The keyboard discharges quickly

1. Fully charge the battery.
2. Reduce RGB brightness.
3. Reduce the screen brightness, if available.
4. Turn off decorative lighting for testing.
5. Compare battery life with and without RGB.
6. Try another known-good USB-C cable.

One key misses or duplicates keystrokes

K725LBY supports hot-swap for compatible 3-pin and 5-pin switches.

First:

1. Check the key assignment in Software.
2. Check the associated macro.
3. Perform a Factory Reset.
4. Test the key with the software closed.
5. Test it on another computer.

How to check a switch using hot-swap

1. Turn off the keyboard.
2. Disconnect the USB cable.
3. Remove the keycap.
4. Carefully remove the switch.
5. Inspect the contacts.
6. Swap it with a known-good compatible switch.
7. Turn on the keyboard and test both positions.

If the problem moves with the switch, the switch is probably faulty. If it remains in the same position, there may be a problem with the hot-swap socket or circuit board.

Checking in Windows 11

1. Right-click Start.
2. Open Device Manager.
3. Check the Keyboards section.
4. Check Human Interface Devices.
5. If you have Bluetooth problems, also check the Bluetooth section.

Checking in Windows 10

1. Right-click Start.
2. Open Device Manager.
3. Check the Keyboards and Human Interface Devices sections.
4. If you have Bluetooth problems, check the Bluetooth section.

Do not install firmware from another K725

K725LBY belongs to the K725 family, but a similar name does not guarantee firmware compatibility.

If the keyboard does not work at all

1. Switch to wired mode.
2. Connect the USB-C cable.
3. Try another USB port.
4. Try another data-capable cable.
5. Allow the battery to charge.
6. Restart the computer.
7. Test the keyboard on another PC.

If K725LBY works via USB, troubleshoot Bluetooth and 2.4 GHz separately.

Can K725LBY be used without the software?

Yes. Proprietary software is not required for normal text input.

The keyboard can work via USB-C, 2.4 GHz, and Bluetooth using standard Windows features. Redragon Software v2.0 is mainly required for macros, key remapping, advanced RGB configuration, and screen management.