Redragon K708MC-RGB-PRO: driver, software, Bluetooth, 2.4 GHz, display, and RGB lighting

Last Updated on 18.09.2026 by DriverNew

Redragon K708MC-RGB-PRO is a 75% wireless mechanical keyboard with 81 keys, USB-C, 2.4 GHz, and Bluetooth connectivity, a built-in display, and RGB lighting. A separate proprietary Redragon driver is not required for normal operation. After connection, Windows automatically uses the standard HID keyboard driver.

For advanced configuration, Redragon provides a separate program for K708MC-RGB-PRO. It is designed for remapping supported keys, creating macros, working with profiles, and additional RGB settings.

Does Redragon K708MC-RGB-PRO need a driver?

A separate Redragon system driver is not required for basic operation.

Windows automatically installs the necessary HID components after connection:

• via USB-C;
• through the included 2.4 GHz USB receiver;
• via Bluetooth.

If the keyboard already types and the main keys work, you do not need to look for an additional driver.

The proprietary program is a configuration utility and does not replace the standard Windows HID driver.

Official K708MC-RGB-PRO software

It is recommended to download the program from the official Redragon download center:

Redragon software

For K708MC-RGB-PRO, Redragon provides a separate installer:

Redragon K708MC-RGB-PRO.exe

Do not use the software for the standard K708-RGB-PRO, K708AK-RGB-PRO, K708GF-RGB-PRO, or another version simply because these keyboards belong to the same family.

Why the program is called KS82 PRO MAX

The following designations are used inside the verified official K708MC-RGB-PRO installer:

KS82 PRO MAX

and

KS82 PRO MAX机械键盘驱动程序

Therefore, after installation, the name of the window, shortcut, or program may differ from the marketing name Redragon K708MC-RGB-PRO.

Do not uninstall the program just because it says KS82 PRO MAX if the installer was downloaded from the official K708MC-RGB-PRO page.

Installer digital signature

The verified K708MC-RGB-PRO installer has an Authenticode digital signature.

The end-entity signer certificate lists:

Shenzhen Evision Semiconductor Technology Co., Ltd

Therefore, the usual instructions for bypassing a SmartScreen warning for an unsigned file are not required for this model.

How to install K708MC-RGB-PRO software

1. First connect the keyboard and make sure it works normally without the proprietary software.
2. Download the program specifically for K708MC-RGB-PRO.
3. For the initial installation, it is recommended to use a wired USB-C connection.
4. Close Redragon programs for other keyboards.
5. Run Redragon K708MC-RGB-PRO.exe.
6. Confirm the Windows prompt to allow changes if it appears.
7. Complete the installation.
8. Launch the program.
9. Do not be surprised if the interface uses the name KS82 PRO MAX.
10. Check whether the keyboard is detected.

If you only need normal text input, wireless connectivity, and built-in RGB effects, you do not need to install the program.

Wired USB-C connection

Wired mode is convenient for the initial check, charging, and diagnosing wireless problems.

1. Move the 2.4G / OFF / BT switch to OFF.
2. Connect the USB-C cable to the keyboard.
3. Connect the other end of the cable directly to a USB port on the computer.
4. Wait a few seconds.
5. Open a text editor and test text input.

If K708MC-RGB-PRO works normally over USB, the standard Windows HID driver is installed correctly.

Connecting via 2.4 GHz

The included USB receiver is used for 2.4 GHz mode.

1. Move the switch to 2.4G.
2. Connect the included USB receiver directly to the computer.
3. Wait a few seconds.
4. Test the keyboard.

If pairing has been saved, the connection is usually established automatically.

Re-pairing the 2.4 GHz receiver

If the keyboard works over USB or Bluetooth but no longer connects to the receiver:

1. Make sure the keyboard has sufficient charge.
2. Move the switch to 2.4G.
3. Disconnect the USB receiver from the computer.
4. Press and hold FN + 4 for about 3 seconds.
5. Wait for the indicator to flash rapidly.
6. Connect the included USB receiver to the computer.
7. Place the keyboard near the receiver.
8. Wait for pairing to complete.

Connecting K708MC-RGB-PRO via Bluetooth

The keyboard supports three Bluetooth profiles.

A short press switches between already saved Bluetooth profiles. For new pairing, hold the required combination for about 3 seconds.

In the list of available Bluetooth devices, the keyboard may appear as:

• BT5.2_1;
• BT5.2_2;
• BT5.2_3.

Bluetooth in Windows 11

1. Move the keyboard switch to BT.
2. Hold FN + 1, FN + 2, or FN + 3 for about 3 seconds.
3. Open Settings → Bluetooth & devices.
4. Turn on Bluetooth.
5. Click Add device.
6. Select Bluetooth.
7. Find the corresponding BT5.2_1, BT5.2_2, or BT5.2_3 profile.
8. Select the device and wait for the connection to complete.

Bluetooth in Windows 10

1. Move the keyboard switch to BT.
2. Hold the required combination FN + 1, FN + 2, or FN + 3 for about 3 seconds.
3. Open Settings → Devices → Bluetooth & other devices.
4. Turn on Bluetooth.
5. Click Add Bluetooth or other device.
6. Select Bluetooth.
7. Select the corresponding Bluetooth profile for the keyboard.
8. Complete the pairing process.

Switching between Bluetooth devices

After the initial pairing, use a short press:

• FN + 1 — first device;
• FN + 2 — second device;
• FN + 3 — third device.

Holding the corresponding combination starts a new pairing process.

If Bluetooth no longer connects

If the profile remains saved in Windows but the connection can no longer be established, remove the old entry and pair the device again.

Windows 11

1. Open Settings → Bluetooth & devices → Devices.
2. Find the corresponding Bluetooth profile for the keyboard.
3. Open the device menu and select Remove device.
4. Switch K708MC-RGB-PRO to BT mode.
5. Hold the required combination FN + 1, FN + 2, or FN + 3.
6. Add the device again.

Windows 10

1. Open Settings → Devices → Bluetooth & other devices.
2. Select the saved keyboard.
3. Click Remove device.
4. Start a new pairing mode.
5. Select Add Bluetooth or other device → Bluetooth.
6. Add the keyboard again.

Removing the Bluetooth pairing does not remove the standard Windows HID driver and does not affect the 2.4 GHz connection.

Controlling RGB lighting without the program

The main RGB functions can be controlled directly from the keyboard.

The keyboard supports built-in RGB effects, and brightness and speed can be adjusted through several levels.

With FN + Enter, compatible modes allow you to switch between supported colors and a multicolor RGB option.

Custom lighting without the program

K708MC-RGB-PRO lets you create your own lighting layout directly from the keyboard.

Use:

FN + Backspace

1. Press FN + Backspace to enter custom mode.
2. Use the combination again to start recording.
3. After entering configuration mode, the Caps Lock indicator starts flashing.
4. Select the required key and press it repeatedly to set the desired color.
5. Repeat the action for other keys.
6. Press FN + Backspace to save the result.

For more advanced RGB configuration, you can use the proprietary program.

Built-in 1.14-inch display

K708MC-RGB-PRO is equipped with a built-in display and a multifunction knob.

Different official descriptions use different terms for the screen technology, so for configuration it is sufficient to refer to the built-in 1.14-inch display itself.

To use the menu:

1. Press the multifunction knob to open the menu.
2. Rotate the knob to move between the available items.
3. Press the knob to confirm the selected function.

If no action is taken for several seconds, the screen returns to normal mode.

The built-in menu allows you to change supported hardware settings without launching the program in Windows.

If the display does not work

If the keyboard types but the screen does not display information:

1. Connect K708MC-RGB-PRO via USB-C.
2. Check the multifunction knob.
3. Try opening the built-in menu by pressing the knob.
4. Disconnect the keyboard for a few seconds and connect it again.
5. Perform a factory reset with FN + ESC.
6. Test the device before launching the Redragon program.

If the keyboard works but the display remains completely inactive after a reset and reconnection, the cause may be hardware-related. Reinstalling the standard HID driver usually does not restore a faulty display.

Switching between Windows and macOS modes

For Windows, use:

FN + W

For macOS:

FN + A

The operating system mode may also be available through the built-in display menu.

If the Win, Alt, or other system keys begin working unusually in Windows, first restore Windows mode with FN + W.

Locking the Windows key

To lock the Windows key, use:

FN + Win

Pressing the combination again restores normal operation of the key.

Multimedia functions

How to check the battery level

To display the battery level, use:

FN + INS

Hold the combination to make the keyboard display the battery level. After you release the keys, the device returns to the current RGB mode.

When the battery level is low, connect the keyboard with a USB-C cable.

Resetting K708MC-RGB-PRO to factory settings

If the keyboard works incorrectly after changing RGB, profiles, the operating system mode, or other settings, perform a hardware reset.

Press and hold:

FN + ESC

Hold the combination for about 3 seconds.

After the reset, first test the keyboard without launching the proprietary program.

What the KS82 PRO MAX program is used for

Despite the internal KS82 PRO MAX name, in this case it refers to the program that the official Redragon website provides for K708MC-RGB-PRO.

It is intended for supported functions including:

• key remapping;
• macro creation;
• profile management;
• advanced RGB configuration.

This program is not required to connect the keyboard via USB-C, 2.4 GHz, or Bluetooth.

Creating macros

1. Connect K708MC-RGB-PRO to the computer.
2. Launch the proprietary program. In the interface, it may be called KS82 PRO MAX.
3. Open the macro management section.
4. Create a new macro.
5. Record the required key sequence.
6. If necessary, configure the available delays.
7. Save the macro.
8. Assign it to a supported key.
9. Apply the changes.
10. Test the result.

If the program does not detect K708MC-RGB-PRO

If the keyboard works normally but the program does not detect the device:

1. Make sure the package installed is specifically for K708MC-RGB-PRO.
2. Do not uninstall the program just because it is named KS82 PRO MAX.
3. Move the keyboard switch to OFF.
4. Connect the keyboard directly to the computer with a USB-C cable.
5. Do not use a USB hub or docking station.
6. Try another USB port.
7. Close Redragon programs for other devices.
8. Close KS82 PRO MAX and launch the program again.
9. Restart Windows if necessary.

If software for another K708 version is installed

Before installing the correct software, it is recommended to remove the incompatible program.

Windows 11

1. Open Settings → Apps → Installed apps.
2. Find the Redragon program for another K708 version.
3. Open the menu next to its name.
4. Select Uninstall.
5. Restart Windows.
6. If necessary, perform an FN + ESC reset.
7. Test K708MC-RGB-PRO without the program.
8. Install the official package specifically for K708MC-RGB-PRO.

Windows 10

1. Open Settings → Apps → Apps & features.
2. Find the incorrect Redragon program.
3. Select it and click Uninstall.
4. Restart Windows.
5. Test the keyboard without the proprietary software.
6. Then install the correct K708MC-RGB-PRO program.

Removing the proprietary program does not remove the standard Windows HID driver.

If Bluetooth and 2.4 GHz do not work

First test the keyboard in wired mode.

1. Move the switch to OFF.
2. Connect the USB-C cable.
3. Test text input.

If the keyboard works over USB:

1. charge the device;
2. check the position of the mode switch;
3. repeat 2.4 GHz pairing using FN + 4;
4. remove the old Bluetooth pairing and create it again;
5. try another USB port for the receiver.

If wired mode works, the problem is usually not related to the basic Windows HID driver.

If the 2.4 GHz connection drops intermittently

1. Check the keyboard’s charge level.
2. Connect the receiver directly to the computer.
3. Do not use a USB hub for testing.
4. Try another USB port.
5. Move the keyboard closer to the receiver.
6. Move the receiver away from sources of strong radio interference.
7. If necessary, repeat pairing using FN + 4.

If Bluetooth disconnects intermittently

1. Check the battery level.
2. Make sure the correct Bluetooth profile is selected.
3. Move the keyboard closer to the computer.
4. Remove the old pairing and add the device again.
5. Test the keyboard with another computer or another Bluetooth device.

If K708MC-RGB-PRO works reliably over USB and 2.4 GHz but Bluetooth disconnects only on one computer, also check that computer’s Bluetooth adapter and its driver.

If one key does not work

K708MC-RGB-PRO supports replaceable mechanical switches. Therefore, if one key fails, you can test the switch itself.

1. Turn off the keyboard and disconnect the USB-C cable.
2. Remove the keycap from the problem key.
3. Carefully remove the switch with a suitable switch puller.
4. Check its metal contacts.
5. Install a known-good compatible 3-pin or 5-pin switch.
6. Turn on the keyboard and test it again.

If the problem moves with the switch, the switch itself is most likely faulty.

If the same key position still does not work with a known-good switch, there may be a problem with the hot-swap socket, PCB, or another hardware component.

If a key registers twice

If one press sometimes produces two identical characters:

1. Test the key in a normal text editor.
2. Close the proprietary program and repeat the test.
3. Test the keyboard in wired USB mode.
4. If the problem persists, turn off the keyboard.
5. Replace the suspected switch with a known-good one.
6. Repeat the test.

If the double input moves with the switch, the switch is the cause. If the problem remains at the same key position, there may be a fault in the hot-swap socket or PCB.

If Windows does not detect K708MC-RGB-PRO at all

Use wired mode for diagnosis.

1. Move the switch to OFF.
2. Connect the USB-C cable directly to the computer.
3. Try another USB port.
4. Do not use a USB hub.
5. If possible, try another known-good USB-C cable that supports data transfer.
6. Restart Windows.
7. Test the keyboard on another computer.

If K708MC-RGB-PRO works on another computer, you can have Windows redetect the HID device.

Redetecting the keyboard in Windows

1. Connect K708MC-RGB-PRO via USB.
2. Right-click the Start button and select Device Manager.
3. Expand Keyboards.
4. If several HID keyboards are displayed, do not uninstall all of them.
5. Disconnect K708MC-RGB-PRO and identify which entry disappears.
6. Connect the keyboard again and make sure the corresponding entry reappears.
7. Right-click the device you have positively identified.
8. Select Uninstall device.
9. Disconnect the keyboard for a few seconds.
10. Connect it again.

Windows will automatically reinstall the standard HID driver.

If K708MC-RGB-PRO is not detected over USB even on another computer, installing software for another Redragon model usually will not help. In this case, check the USB-C cable, connector, and the keyboard itself.