Last Updated on 01.12.2025 by DriverNew
Drivers and software for operating systems Windows 11, Windows 10, Windows 8, Windows 8.1, Windows 7, Windows Vista, Windows XP (64-bit / 32-bit)
Printer Model: Canon i-SENSYS LBP2900
These are the drivers and software that are included on the CD that came with the printer.
How to install the printer driver correctly: Do not connect the printer to the computer. Start installing the software first. During the installation process, a message will appear on the monitor informing you when to connect the printer to your computer.
If you see the message ‘Found New Hardware’ on the screen, click Cancel and disconnect the USB cable. Then proceed to install the software. A common mistake when installing a driver is that you first connect the device to your computer using a USB cable and then install the driver. In this case, the operating system detects the connected device and installs its own driver, which may not work correctly or not work at all. However, some other devices may work fine with the driver installed by the operating system. Therefore, if there is a driver specially created for your device, then first start installing this driver and only then connect the device to the computer.
Software for Windows operating systems
Download drivers and software for Windows (64-bit)
Download drivers and software for Windows (32-bit)
File version: R1.50V3.30. File Size: 10 MB
Canon i-SENSYS LBP2900 Printer Driver
Full Driver and Software Package (Windows)
Double-click the files to decompress them. A new folder will be created in the same folder. The new folder will have the same name as the compressed file. Double-click the decompressed Setup.exe file to start installation.
Accept the terms of the license agreement and proceed with the installation of the software.
Choose how you want to connect to your computer and start installing the software.
Installing the Canon LBP2900 / LBP2900B printer driver in Windows 11
Canon didn’t release a Windows 11 driver for the LBP2900 / LBP2900B. The reliable solution is to install the official Windows 10 (x64) CAPT driver manually with Have Disk and point Windows to the INF file inside the package.
(This article contains a video with detailed instructions on installing the printer driver).
What you need
Driver file (64-bit): LBP2900_R150_V330_W64_uk_EN_2.exe
You can download the printer driver from Canon official website, here is the direct link to download this driver:
https://gdlp01.c-wss.com/gds/2/0100002782/04/LBP2900_R150_V330_W64_uk_EN_2.exe
After extracting the file above, go to: …\x64\Driver\CNAB4STD.INF
Step-by-step installation (Windows 11)
1) Extract the driver
Open that folder and confirm you can see: …\x64\Driver\CNAB4STD.INF.
Keep this window open — you’ll point Windows to this file.
If you don’t see file name extensions (.INF) when you view files in File Explorer: In the search box on the taskbar, type file explorer, and in the search results, select File Explorer. In File Explorer, select View → Show → File name extensions.
2) Connect and power on the printer
Plug the LBP2900/LBP2900B into your PC with USB. Turn the printer On and wait ~10–20 seconds.
If Windows shows “Driver unavailable,” continue — the steps below will fix it.
3) Open the classic Add-Printer wizard
Press Win + R, type control, press Enter to open Control Panel.
Go to Hardware and Sound → Devices and Printers. Click Add a printer. If your printer isn’t listed, click The printer that I want isn’t listed.
4) Choose manual setup
Select Add a local printer or network printer with manual settings → Next.
On Choose a printer port, select Use an existing port → pick USB001 (Virtual printer port for USB) → Next. (If printing doesn’t work later, you can switch to USB002 in Printer Properties → Ports.)
5) Install the Canon driver with Have Disk
On Install the printer driver, click Have Disk… → Browse…. Navigate to the extracted folder and select: …\x64\Driver\CNAB4STD.INF → Open → OK. Choose Canon LBP2900/2900B (CAPT) when it appears → Next. If asked to replace an existing driver, choose Replace the current driver → Next. Name the printer (e.g., Canon LBP2900) → Next → Finish. Right-click your new printer → Printer properties → Print Test Page.
This video shows you how to install a device driver manually using “Have Disk” in the Windows operating system.
Quick fixes (only if it doesn’t print first try)
No print / “Offline”:
Right-click the printer → Printer properties → Ports → switch between USB001 and USB002 → Apply → test again.
Model not listed when browsing:
Make sure you selected CNAB4STD.INF inside the …\x64\Driver\ folder.
Print Spooler hiccup:
Press Win + R → type services.msc → Enter → double-click Print Spooler → Restart → try a test page.
Why we recommend only this method
Right-clicking an .INF file to “Install” may add files to Windows, but it often doesn’t link the CAPT driver to the correct USB virtual port on Windows 11. The Have Disk method above sets everything up properly in one pass and is the most reliable approach for this printer.
Your Canon LBP2900/LBP2900B should now work normally on Windows 11 using the Windows 10 driver.
Leave a Reply