Last Updated on 16.12.2023 by DriverNew
Drivers and software for operating systems: Windows 11, Windows 10, Windows 8 / 8.1, Windows 7, Windows Vista (64-bit / 32-bit)
Lexmark MC3326ADWE – Download and install printer and scanner drivers and software. Instructions for installing and using the software (Lexmark MC3326ADWE).
Installing the printer driver correctly: Do not connect the printer to the computer. Start installing the software first. During the installation process, a message will appear on the monitor informing you when to connect the printer to your computer.
If you see the message ‘Found New Hardware’ on the screen, click Cancel and disconnect the USB cable. Then proceed to install the software. A common mistake when installing a driver is that you first connect the device to your computer using a USB cable and then install the driver. In this case, the operating system detects the connected device and installs its own driver, which may not work correctly or not work at all. However, some other devices may work fine with the driver installed by the operating system. Therefore, if there is a driver specially created for your device, then first start installing this driver and only then connect the device to the computer.
Software for Windows operating systems
Download printer driver and software for Windows
(Printer, scanner drivers and other software)
Lexmark MC3326ADWE : Prepare the printer for connection to your computer in advance. Remove the packaging from the printer and install the cartridge and paper.
Installing software for the Windows operating system
Double-click the downloaded .exe file. It will be decompressed and the Setup screen will be displayed. Follow the instructions to install the software and perform the necessary settings.
In the ‘User Account Control’ window that appears, click ‘Yes’.
Select ‘New Install’ and click ‘Start’.
Accept the terms of the license agreement and proceed with the installation of the software.
Select a method to connect to your computer and continue installing the software. If you choose to connect using a USB cable, connect the printer to your computer only after you have completed installing the software.
Lexmark MC3326ADWE
Printer description: Lexmark MC3326ADWE 4-in-1 Colour Laser Multifunction Device (Printer, Copier, Scanner, Fax, WLAN, LAN, up to 24 ppm, Automatic Double-Sided Print, 7.2 cm Touch Screen) Black / Grey. The compact, lightweight Lexmark MC3326adwe multifunction printer offers colour printing, automatic scanning, copying and faxing with touch screen convenience for small workgroups. With up to 24 pages per minute output and high-yield toner cartridges for printing, keep your work flowing. And Wi-Fi, one-piece printer cartridges, Gigabit Ethernet and Lexmark all-round security features are integrated as standard. Connectivity via standard Wi-Fi, Gigabit Ethernet and USB.
How to scan documents and photos.
Lexmark Scanback Utility is software for a network-connected scanner.
Download scanner software – ‘Lexmark Scanback Utility’
Using “Lexmark Scanback Utility”. From the computer, run “Lexmark Scanback Utility”, and then click “Next”. Click “Setup”, and then add the printer IP address. View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.000.000.000. Click “Close” – “Next”.
Select the size of the original document, and then click “Next”. Select a file format and scan resolution, and then click “Next”. Type a unique scan profile name, and then click “Next”. Browse to where you want to save the scanned document, set a file name, and then click “Next”. Click “Finish”. To reuse the scan profile, enable “Create Shortcut”, and then type a unique shortcut name. Load an original document into the automatic document feeder or on the scanner glass.
Depending on your printer model, from the control panel, do either of the following: Option 1. Touch Scan to Computer, and then select a scan profile. Make sure that Scan to Computer is enabled. From the home screen, touch “Settings” – “Device” – “Visible Home Screen Icons”. Option 2. Navigate to “Shortcuts” – “OK” – “Scan to Computer” – “OK”, and then select a scan profile.
This video shows and explains in detail how to use the “Lexmark Scanback Utility” software.
Lexmark MC3326ADWE
If you have problems using this software, you can use the easier way to scan documents and photos.
How to scan documents and save them on a computer (If the printer is multifunctional and can act as a scanner).
Use the “Windows Fax and Scan” software to scan documents. This software is in the Windows operating system. The quickest and easiest way to open “Windows Fax and Scan” is to search for it. Type “Windows Fax” in the search bar and select it in the search results. In Windows 10, the search bar is right next to the “Start” button. In previous versions of Windows, the search bar might be inside the “Start” menu. If you’d rather not search, “Windows Fax and Scan” is available via the “Start” menu in every version of Windows.
In the software menu, click “New Scan” to go to the settings. The scanner must be connected to the computer.
You can change scanner settings or click “Scan” to scan documents.
“Windows Fax and Scan” looks the same on Windows 7, Windows 8, and Windows 10 because Microsoft hasn’t updated the interface of the program since introducing it in Windows Vista. No matter what version of Windows you use, follow these instructions to scan a document or photo on your MFP or standalone scanner.
This video shows and explains in detail how to use the “Windows Fax and Scan” software.
Lexmark MC3326ADWE
Software for MAC operating systems
On computers running the Macintosh operating system – macOS 10.7 or later, you do not need to install a printer driver. Use AirPrint software to print. Therefore, there is no need to download and install drivers.
How to scan documents and photos.
Make sure that the printer is added to the computer. Load an original document into the automatic document feeder or on the scanner glass. From the computer, do either of the following: Open “Image Capture” or Open “Printers and Scanners”, and then select a printer. Click “Scan” – “Open Scanner”. From the Scanner window, do one or more of the following: Select where you want to save the scanned document. Select the size of the original document. To scan from the ADF, select “Document Feeder” from the Scan Menu or enable “Use Document Feeder”. If necessary, configure the scan settings. Click “Scan”.
Leave a Reply