Last Updated on 20.11.2024 by DriverNew
Drivers and software for operating systems Windows 11, Windows 10, Windows 8, Windows 8.1, Windows 7, Windows Vista (64-bit / 32-bit)
Printer Model: Epson WorkForce Pro WF-M5694
Drivers for Epson WorkForce Pro WF-M5694 printer and scanner. Download and install all necessary drivers and software. After installing this software, you will be able to use all the features of the Epson WorkForce Pro WF-M5694 printer.
How to install the Epson WorkForce Pro WF-M5694 printer driver correctly: Do not connect the printer to the computer. Start installing the software first. During the installation process, a message will appear on the monitor informing you when to connect the printer to your computer.
If you see the message ‘Found New Hardware’ on the screen, click Cancel and disconnect the USB cable. Then proceed to install the software. A common mistake when installing a driver is that you first connect the device to your computer using a USB cable and then install the driver. In this case, the operating system detects the connected device and installs its own driver, which may not work correctly or not work at all. However, some other devices may work fine with the driver installed by the operating system. Therefore, if there is a driver specially created for your device, then first start installing this driver and only then connect the device to the computer. If you installed the driver incorrectly, uninstall the driver, restart your computer, and reinstall the software. Be sure to restart your computer after installing and after uninstalling the drivers. The download is carried out from the official website of Epson.
Software for Windows operating systems
Download drivers and software for Windows Download and install software for Epson WorkForce Pro WF-M5694: drivers and software for printer and scanner. |
Software for MAC operating systems
Download drivers and software for MAC Download and install software for Epson WorkForce Pro WF-M5694: drivers and software for printer and scanner. |
Installing drivers and software for printer and scanner: Epson WorkForce Pro WF-M5694. Double-click the downloaded .exe file. It will be decompressed and the Setup screen will be displayed. Follow the instructions to install the software and perform the necessary settings.
After installing this software, you will be able to print, scan and use all printer features. You don’t need any other software.
How to scan documents and photos.
The ‘Epson Scan’ is software for conveniently scanning photographs, documents, etc. In the Windows operating system, click the ‘Start’ button to find the shortcut for the ‘Epson Scan’ software. You can then use your computer mouse to drag this shortcut to your desktop.
If you find it difficult to understand the settings of this software, then I offer you the easiest way to scan any documents and photos. To do this, use the ‘Photo Mode’ mode and you can scan any documents and photos. Many users of this software use ‘Photo Mode’ to scan documents or photos. If you need to change the location where the scanned image will be saved, then use ‘Folder’ for this. Recommended scanning quality: 300 dpi (suitable for scanning any documents and photos). The higher the quality, the longer the scan takes and the larger the file size. Save type ‘JPEG’ or ‘PNG’ is better for scanning. The quality of the scanned documents is good and there is no need to change other program settings.
Epson WorkForce Pro WF-M5694
If you have problems using this software, you can use the easier way to scan documents and photos.
How to scan using the software built into the Windows operating system.
You can use “Windows Fax and Scan” software to scan documents and photos. This software is included in the operating systems: Windows 11, Windows 10, Windows 8, Windows 7, Windows Vista. You can access this software through the Start menu in every version of the Windows operating system. You can read more about this here.
To use this software, be sure to install the scanner driver.
If you have problems installing drivers or your printer and scanner are not working properly. You can read how to fix these problems here.
Epson WorkForce Pro WF-M5694
Download and install printer and scanner firmware update software
This file contains the Epson WorkForce Pro WF-M5694 firmware enhancement version GW18L6.
|
Software for Windows operating systems
|
Software for MAC operating systems
|
Information about the printer firmware update software:
Software Creation Date: 10/14/21
File name: FW_GW18L6.exe
Printer Model: Epson WorkForce Pro WF-M5694
How to use the printer firmware update software.
Connect the printer to the computer with a USB cable, but do not turn on the power. You will be told at what stage you need to turn on the power of the printer. Make sure there are no jobs in the print queue. Do not use the printer until the firmware update is completed. The update can take up to 15 minutes. You cannot cancel or interrupt the update. Do not turn off the printer while the update is in progress, even if the display turns off or turns blue.
Double-click the downloaded .exe file. It will be decompressed and the Setup screen will be displayed. Follow the instructions to install the software.
This software will update the firmware of your Epson printer and scanner. Click ‘Next’ to continue.
Accept the terms of the license agreement and click ‘Next’.
Turn the power on. If it is already on, turn the power off and on again making sure no jobs in the print queue. Disconnect all cables from your computer, except the power cord and any USB or Ethernet cable used for printing. Click [Next] to start the printer update. Queued print jobs will be canceled by updating firmware. Do not use the printer until the firmware update is complete. It may take up to 15 minutes to complete the update. You cannot cancel or interrupt the update. If the firmware update fails and the printer goes into recovery mode (indicated by flashing status lights), you will not be able to update the printer’s firmware over a network connection. Connect your computer to the printer using a USB cable instead and try updating the firmware again. Do not turn off your product while updating even if its LCD screen turns off or blue.
Click on the printer model name, and then click on the ‘Start’ button.
Leave a Reply