Xerox WorkCentre 7328 Download and install printer driver

Last Updated on 02.03.2026 by DriverNew

For Xerox WorkCentre 7328, Xerox uses the universal print driver Xerox Global Print Driver (GPD). It supports Windows 11, Windows 10, Windows 8, Windows 8.1, and Windows 7, but it is distributed as a ZIP archive without an installer (.exe). That’s normal: inside you’ll find the driver in .INF format, which you install using standard Windows tools.

1) Where to download the drivers (official Xerox pages)

Xerox Global Print Driver (PS and PCL6) — downloads page:
https://www.support.xerox.com/en-us/product/global-printer-driver/downloads

Which driver to choose: PS or PCL6

On the Xerox page, there are two printer driver options:

• UNIV_5.1076.3.0_PS_x64.zip — PostScript (PS) driver
• UNIV_5.1076.3.0_PCL6_x64.zip — PCL6 driver

Recommendation for most users: choose PS. It is often more stable for printing PDFs, complex layouts, and documents with fonts.
When PCL6 is better: if you mostly print from Word/Excel and/or if you run into issues after installing PS (print jobs hang, odd job processing, etc.), try PCL6.

Why there is no .exe in the archive and what’s inside

There is no installer because this is a “driver package” for manual installation. You install it via the .INF file:

• PS: x3UNIVP.inf (inside the extracted folder)
• PCL6: x3UNIVX.inf (inside the extracted folder)

If file extensions (such as .INF) are hidden and you can’t find x3UNIVP.inf or x3UNIVX.inf, look for a file named x3UNIVP or x3UNIVX. It’s the same file—Windows may have “File name extensions” turned off.

Preparation before installation

1. Download the required archive (PS or PCL6) from the official Xerox page.
2. Extract the ZIP to a simple folder.
3. Choose the connection method: USB or network. If it’s a network connection, you’ll need the printer’s IP address (you can view it on the device panel or print a configuration report).

2) Driver installation (USB connection)

If the Xerox WorkCentre 7328 is connected via USB, the usual order is:

1. Connect the USB cable and wait for Windows to create the printer (or for a new device to appear).
2. Open the list of printers and find the added printer (even if it is named “USB Printing Support” or similar).
3. Open Printer properties → Advanced tab → New Driver… or Change Driver….
4. Click Have Disk… and point to the INF (PS: x3UNIVP.inf or PCL6: x3UNIVX.inf).
5. Apply the settings and print a test page.

This video shows how to manually install a driver using “Have Disk…”

3) Driver installation in Windows 10 / Windows 11 (network, via IP and .INF)

This is a common method for the Xerox WorkCentre 7328.

1. Open Settings → Bluetooth & devices → Printers & scanners.
2. Click Add device.
3. If the device is not found automatically, select something like Add manually / The printer that I want isn’t listed.
4. Select the option to add a printer using manual settings.
5. At the port selection step:
   • Select Create a new port
   • Port type: Standard TCP/IP Port
   • Enter the IP address of the Xerox WorkCentre 7328
6. When the manufacturer/model selection window appears, click Have Disk….
7. Click Browse and select the INF file from the extracted folder:
   • for PS: x3UNIVP.inf
   • for PCL6: x3UNIVX.inf
8. Select the Xerox driver from the list and click Next.
9. Set the printer name (for example, Xerox WorkCentre 7328) and finish installation.
10. Print a test page (recommended to verify printing right away).

4) Driver installation in Windows 7 (network, via IP and .INF)

1. Open Start → Control Panel → Devices and Printers.
2. Click Add a printer.
3. Select Add a local printer (even if it’s a network printer—we will create a TCP/IP port next).
4. Select Create a new port → Standard TCP/IP Port, then click Next.
5. Enter the IP address of the device and finish creating the port.
6. At the driver selection step, click Have Disk… and point to the INF:
   • for PS: x3UNIVP.inf
   • for PCL6: x3UNIVX.inf
7. Finish installation and print a test page.