Last Updated on 24.03.2026 by DriverNew
If you have a Canon PIXMA iP4600 printer, Canon’s official website may show a message saying that the device is no longer supported for the selected operating system when you choose Windows 10 or Windows 11. For this model, that is normal: the printer is old, and Canon no longer releases new drivers for modern versions of Windows.
However, that does not mean the printer cannot be installed. For Windows 10 and Windows 11, users usually rely on an older official Canon driver, which in many cases still works.
Which Driver to Download
For installation, use this official Canon driver file: download the Canon PIXMA iP4600 driver.
This is an older official Canon driver. It is not labeled as a driver specifically for Windows 11, but it is the file most commonly used when the support page shows that Windows 10 or Windows 11 is unsupported.
Before You Install
Before starting the installation, do the following:
- turn on your computer;
- if the printer is already connected by USB, temporarily disconnect the cable;
- if you have already tried to install the printer before, remove it from Windows;
- run the driver file as an administrator.
Step-by-Step Installation for Canon PIXMA iP4600
Step 1. Download the Driver
Download the file using the official Canon link above.
Step 2. Remove the Previous Printer Installation
Open in Windows:
Settings → Bluetooth & devices → Printers & scanners
If Canon PIXMA iP4600 is already listed, remove it.
Step 3. Restart Your Computer
This is recommended, especially if installation failed before.
Step 4. Run the Driver
Find the downloaded file ip4600svst64220ea24.exe, right-click it, and select Run as administrator.
Step 5. Follow the Installer Prompts
During installation, do not connect the USB cable in advance. Connect the printer only when the installer asks you to do so.
Step 6. Wait Until the Installation Finishes
After the installation is complete, it is a good idea to restart your computer once more.
Step 7. Test Printing
Open any document and print a test page.
Why Canon’s Website Says Windows 10 or Windows 11 Is Not Supported
This is the exact situation that most often confuses users. On Canon’s official support page for the PIXMA iP4600, when you choose Windows 10 or Windows 11, a message may appear saying that the device is no longer supported for the selected operating system.
This means Canon does not release new drivers specifically for those versions of Windows. However, the older official driver can still be downloaded and installed manually. In many cases, that is enough for the printer to work correctly in Windows 10 and Windows 11.
What to Do If the Driver Does Not Install
The Installer Does Not Detect the Printer
- disconnect the USB cable;
- remove the old printer from Windows;
- restart your computer;
- run the installer again;
- connect the cable only when prompted.
The Printer Is Installed but Does Not Print
- turn the printer off, then turn it back on;
- connect it to a different USB port;
- remove the printer from Windows and install it again;
- after installation, print a test page.
The File Does Not Start
- run the file as an administrator;
- temporarily close unnecessary programs;
- open the file properties and enable Compatibility mode for Windows 8 if normal startup does not help.
Is This Driver Suitable for Windows 11 and Windows 10?
Yes, in many cases it is. But it is important to understand: this is not a new driver specifically for Windows 11, but an older official Canon driver. Since the Canon PIXMA iP4600 has long been discontinued from active support, this is the installation method that is usually used.
If the driver installs without errors, the printer usually works in both Windows 10 and Windows 11.
In Short
If Canon’s website says that PIXMA iP4600 is not supported on Windows 10 or Windows 11, that does not mean the printer cannot be installed. In most cases, the older official Canon driver helps. You can download it using the direct link and install it manually.
Leave a Reply