Last Updated on 27.11.2022 by DriverNew
Operating system: Windows 11, Windows 10, Windows 8 / 8.1, Windows 7 Vista XP (64-bit / 32-bit)
Samsung Universal Printer Driver.
Software for the Windows operating system
Installing the printer driver correctly: Do not connect the printer to the computer. Start installing the software first. During the installation process, a message will appear on the monitor informing you when to connect the printer to your computer.If you see the message ‘Found New Hardware’ on the screen, click Cancel and disconnect the USB cable. Then proceed to install the software. A common mistake when installing a driver is that you first connect the device to your computer using a USB cable and then install the driver. In this case, the operating system detects the connected device and installs its own driver, which may not work correctly or not work at all. However, some other devices may work fine with the driver installed by the operating system. Therefore, if there is a driver specially created for your device, then first start installing this driver and only then connect the device to the computer. This software is intended to use all device functions. An additional software for the device is not required.
Software for Windows operating systems
Download printer driver for Windows
How to install the Printer Driver
Use these steps to install the Universal Printer Driver. To start the installation, open the Print Driver. Select “Install” to start the software installation or “Extract” to save the files in a specified location instead. Click “Next” to start the installation wizard. Select the “I have reviewed and accept the installation agreements” box, and then click “Next”. Select the setup options, and then click “Next”. The wizard searches for any USB or network connected Samsung printers, then displays a list of printers to choose from the search. Select the desired printer by highlighting it. All the software installs with a progress bar showing the status. Installation is complete. Click “Finish”, to close the wizard. NOTE: If you receive a “No Printer Found” error, try the following steps, and then click “Search” again. Make sure the USB is fully inserted into the USB port located on the printer. Try a different USB cable and make sure the cable is shorter than 6 ft. Verify the printer is powered on. If you are connecting your printer via the network, check the printer’s network connection, and then retry the setup.
File name: Samsung Universal Printer Driver
Version: V3.00.16.01:01. File size: 27.3 MB
Description: This is the most current driver of the Samsung Universal Printer Driver (UPD) for Windows for Samsung printers. Operating systems: Windows 11, Windows 10 (64-bit / 32-bit), Windows 8 (64-bit / 32-bit), Windows 8.1 (64-bit / 32-bit), Windows 7 (64-bit / 32-bit), Windows Vista (64-bit / 32-bit), Windows XP (64-bit / 32-bit).
Installing the printer software
Before installing the driver and software, do not connect the device to the computer. Start installing the software and you will be prompted when exactly you need to connect your device to your computer. The download is from the Samsung official website. If you installed the driver incorrectly, uninstall the driver, restart your computer, and reinstall the software.
Software for using the scanner
Download scanner driver for Windows
Download and install the software: “Easy Printer Manager” and “Easy Document Creator”.
Download software “Easy Printer Manager”
Download software “Easy Document Creator”
It is recommended to install these two softwares as they complement each other. This software is included with your device and is intended to enable you to use all the features of this device. If you only need the software to operate the scanner, then download and install ‘Easy Document Creator’.
Here you can learn more about this software (PDF file)
If you have problems using this software, you can use the easier way to scan documents and photos.
How to scan documents and save them on a computer (If the printer is multifunctional and can act as a scanner).
Use the “Windows Fax and Scan” software to scan documents. This software is in the Windows operating system. The quickest and easiest way to open “Windows Fax and Scan” is to search for it. Type “Windows Fax” in the search bar and select it in the search results. In Windows 10, the search bar is right next to the “Start” button. In previous versions of Windows, the search bar might be inside the “Start” menu. If you’d rather not search, “Windows Fax and Scan” is available via the “Start” menu in every version of Windows.In the software menu, click “New Scan” to go to the settings. The scanner must be connected to the computer.
You can change scanner settings or click “Scan” to scan documents.
“Windows Fax and Scan” looks the same on Windows 7, Windows 8, and Windows 10 because Microsoft hasn’t updated the interface of the program since introducing it in Windows Vista. No matter what version of Windows you use, follow these instructions to scan a document or photo on your MFP or standalone scanner.
Leave a Reply