{"id":78741,"date":"2026-08-16T10:25:26","date_gmt":"2026-08-16T07:25:26","guid":{"rendered":"https:\/\/drivernew.com\/?p=78741"},"modified":"2026-08-16T10:25:26","modified_gmt":"2026-08-16T07:25:26","slug":"oki-mb472-mb492-and-mb562-cannot-scan-to-a-windows-network-folder-smb-setup-and-cifs-error","status":"publish","type":"post","link":"https:\/\/drivernew.com\/?p=78741","title":{"rendered":"OKI MB472, MB492 and MB562 Cannot Scan to a Windows Network Folder: SMB Setup and CIFS Error"},"content":{"rendered":"<p>If an OKI MB472, MB492 or MB562 can copy and print but cannot save scans to a Windows network folder, reinstalling the scanner driver usually will not help. When using <strong>Scan to Shared Folder<\/strong>, the MFP connects directly to the computer&#8217;s shared folder using the CIFS\/SMB protocol. In this connection, the computer acts as the SMB server and the MFP as the SMB client.<\/p>\n<p>The error may be caused by an incorrect path, a changed computer IP address, the Windows password, folder permissions, the firewall, or an incompatible SMB version. The last point is especially important for this series: the specifications of the original platform list <strong>SMB version 1.0<\/strong>, while modern installations of Windows 10 and Windows 11 do not include the SMB1 server by default.<\/p>\n<div style=\"background-color: #eef6ff; border-left: 5px solid #2271b1; margin: 20px 0; padding: 14px 18px;\">\n<p style=\"margin: 0 0 8px;\"><strong>Do not enable SMB1 Client based on advice from a random guide<\/strong><\/p>\n<p style=\"margin: 0;\">To transfer a scan, the MFP connects to the computer, so Windows must accept an incoming connection. The <strong>SMB 1.0\/CIFS Client<\/strong> component is needed for the opposite situation \u2014 when the computer itself connects to an old network storage device. Enabling it does not fix a Scan to Shared Folder error.<\/p>\n<\/div>\n<h2>Models covered by this guide<\/h2>\n<p>This configuration applies to models built on the same platform:<\/p>\n<ul>\n<li>OKI MB472dn and MB472dnw;<\/li>\n<li>OKI MB492dn;<\/li>\n<li>OKI MB562dnw;<\/li>\n<li>OKI ES4172LP MFP, ES4192 MFP, ES5162 MFP and ES5162LP MFP.<\/li>\n<\/ul>\n<p>The names of some items may differ slightly depending on the firmware version and control panel language, but the <strong>Protocol<\/strong>, <strong>Target URL<\/strong>, <strong>Port No.<\/strong>, <strong>User Name<\/strong> and <strong>Password<\/strong> fields perform the same functions.<\/p>\n<h2>How to determine whether saving to the folder is the actual problem<\/h2>\n<ol>\n<li>Place a sheet on the platen glass and make a normal copy from the MFP control panel.<\/li>\n<li>If you use the automatic document feeder, make a second copy through the ADF.<\/li>\n<li>If both copies are produced, the scanning mechanism is working.<\/li>\n<li>Print any document from the computer. Successful printing confirms communication with the device, but it does not confirm that the MFP can access the shared folder.<\/li>\n<li>Open the MFP&#8217;s IP address in a browser. If its web page does not load, restore the network connection first.<\/li>\n<\/ol>\n<p>Scanner Driver, TWAIN, WIA and ActKey are not required for Scan to Shared Folder. These components are used when scanning is started from the computer or when the file is transferred to ActKey. For a network folder, you only need a working network, a correctly configured CIFS profile and an accessible SMB server.<\/p>\n<h2>Set a fixed address for the computer before configuration<\/h2>\n<p>It is easier to use the computer&#8217;s IP address in the profile rather than its name. This eliminates DNS and NetBIOS resolution errors. However, the address must not change after the router is restarted.<\/p>\n<ol>\n<li>Press <strong>Win + R<\/strong>, enter <strong>cmd<\/strong> and press Enter.<\/li>\n<li>Enter the command:<\/li>\n<\/ol>\n<pre style=\"background: #f6f7f7; border: 1px solid #dcdcde; overflow: auto; padding: 12px;\"><code>ipconfig<\/code><\/pre>\n<ol start=\"3\">\n<li>Find the active Ethernet or Wi-Fi adapter and write down its <strong>IPv4 Address<\/strong>, for example <strong>192.168.1.100<\/strong>.<\/li>\n<li>Open the router settings and create a DHCP reservation for this computer. If that is not possible, assign a correct static address while taking the DHCP range into account.<\/li>\n<li>Do not use the address of a VPN, Bluetooth or virtual-machine adapter.<\/li>\n<\/ol>\n<p>The computer and MFP must be on the same local network. A guest Wi-Fi network, AP Isolation, corporate client isolation or an active VPN may block access even when both devices can access the internet.<\/p>\n<h2>Create a separate account for scanning<\/h2>\n<p>It is recommended to create a standard local account, for example <strong>oki-scan<\/strong>, and allow it to write only to one folder. Do not use an administrator account and do not leave the folder accessible without a password.<\/p>\n<h3>Windows 10<\/h3>\n<ol>\n<li>Open <strong>Settings &gt; Accounts &gt; Family &amp; other users<\/strong>.<\/li>\n<li>Click <strong>Add someone else to this PC<\/strong>.<\/li>\n<li>Select <strong>I don&#8217;t have this person&#8217;s sign-in information<\/strong>.<\/li>\n<li>Select <strong>Add a user without a Microsoft account<\/strong>.<\/li>\n<li>Enter the name <strong>oki-scan<\/strong> and a separate password.<\/li>\n<li>Leave the account type as <strong>Standard User<\/strong>.<\/li>\n<\/ol>\n<h3>Windows 11<\/h3>\n<ol>\n<li>Open <strong>Settings &gt; Accounts &gt; Other users<\/strong>.<\/li>\n<li>Next to the option to add another user, click <strong>Add account<\/strong>.<\/li>\n<li>Select <strong>I don&#8217;t have this person&#8217;s sign-in information<\/strong>.<\/li>\n<li>Select <strong>Add a user without a Microsoft account<\/strong>.<\/li>\n<li>Enter the name <strong>oki-scan<\/strong> and a separate password.<\/li>\n<li>Do not add the user to the Administrators group.<\/li>\n<\/ol>\n<div style=\"background-color: #fffbf0; border-left: 5px solid #ff9800; margin: 20px 0; padding: 14px 18px;\">\n<p style=\"margin: 0 0 8px;\"><strong>A Windows PIN is not a password<\/strong><\/p>\n<p style=\"margin: 0;\">In the Password field of the OKI profile, enter the account password, not the Windows Hello PIN. An account without a password also often cannot be used for network sign-in.<\/p>\n<\/div>\n<h2>Create the folder and assign two levels of permissions<\/h2>\n<ol>\n<li>On drive C, create the folder <strong>C:\\Scans<\/strong>.<\/li>\n<li>Right-click the folder and open <strong>Properties<\/strong>.<\/li>\n<li>On the <strong>Sharing<\/strong> tab, click <strong>Advanced Sharing<\/strong>.<\/li>\n<li>Enable <strong>Share this folder<\/strong>.<\/li>\n<li>In the share name field, enter <strong>Scans<\/strong>.<\/li>\n<li>Click <strong>Permissions<\/strong>, add the user <strong>oki-scan<\/strong> and allow <strong>Read<\/strong> and <strong>Change<\/strong>.<\/li>\n<li>Remove the <strong>Everyone<\/strong> group if it is not required by other users.<\/li>\n<li>Return to the folder properties and open the <strong>Security<\/strong> tab.<\/li>\n<li>Click <strong>Edit &gt; Add<\/strong> and add the user <strong>oki-scan<\/strong>.<\/li>\n<li>Allow <strong>Modify<\/strong>, <strong>Read &amp; execute<\/strong>, <strong>List folder contents<\/strong>, <strong>Read<\/strong> and <strong>Write<\/strong>.<\/li>\n<li>Apply the changes.<\/li>\n<\/ol>\n<p>The permissions on the <strong>Sharing<\/strong> and <strong>Security<\/strong> tabs are checked together. If writing is allowed at one level but only reading is allowed at the other, the MFP may find the folder but will not be able to save a file.<\/p>\n<p>For the initial test, use Latin letters and numbers without spaces in the user name, computer name and share name. After the test succeeds, you can test more complex names separately.<\/p>\n<h2>Windows 10: enable sharing on a private network<\/h2>\n<ol>\n<li>Open <strong>Settings &gt; Network &amp; Internet<\/strong>.<\/li>\n<li>Open the properties of the active Ethernet or Wi-Fi connection.<\/li>\n<li>Select the <strong>Private<\/strong> network profile.<\/li>\n<li>Open <strong>Control Panel &gt; Network and Internet &gt; Network and Sharing Center<\/strong>.<\/li>\n<li>Click <strong>Change advanced sharing settings<\/strong>.<\/li>\n<li>Under <strong>Private<\/strong>, turn on network discovery and file and printer sharing.<\/li>\n<li>Under <strong>All Networks<\/strong>, leave password protected sharing enabled.<\/li>\n<\/ol>\n<h2>Windows 11: enable sharing on a private network<\/h2>\n<ol>\n<li>Open <strong>Settings &gt; Network &amp; internet<\/strong>.<\/li>\n<li>Open the properties of the active connection and set <strong>Network profile type<\/strong> to <strong>Private network<\/strong>.<\/li>\n<li>Go to <strong>Advanced network settings &gt; Advanced sharing settings<\/strong>.<\/li>\n<li>Expand <strong>Private networks<\/strong>.<\/li>\n<li>Turn on <strong>Network discovery<\/strong> and <strong>File and printer sharing<\/strong>.<\/li>\n<li>Expand <strong>All networks<\/strong> and leave <strong>Password protected sharing<\/strong> enabled.<\/li>\n<\/ol>\n<p>Disabling password protection is not the correct solution for permanent MFP operation. The OKI profile supports a user name and password; use them instead of guest access.<\/p>\n<h2>Check the Windows service and firewall<\/h2>\n<ol>\n<li>Press <strong>Win + R<\/strong>, enter <strong>services.msc<\/strong> and press Enter.<\/li>\n<li>Find the <strong>Server<\/strong> service.<\/li>\n<li>If it is stopped, open its properties, set <strong>Startup type<\/strong> to <strong>Automatic<\/strong> and click <strong>Start<\/strong>.<\/li>\n<li>Open <strong>Windows Security &gt; Firewall &amp; network protection &gt; Allow an app through firewall<\/strong>.<\/li>\n<li>Allow <strong>File and Printer Sharing<\/strong> only for the private network.<\/li>\n<li>If additional firewall rules are used, allow the inbound rule <strong>File and Printer Sharing (SMB-In)<\/strong> for the private profile and local subnet.<\/li>\n<\/ol>\n<div style=\"background-color: #fff1f0; border-left: 5px solid #d63638; margin: 20px 0; padding: 14px 18px;\">\n<p style=\"margin: 0 0 8px;\"><strong>Do not expose TCP port 445 to the internet<\/strong><\/p>\n<p style=\"margin: 0;\">SMB should be accessible only within a trusted local network. Do not create port forwarding for port 445 on the router and do not allow the SMB rule for a public network profile.<\/p>\n<\/div>\n<h2>Test the folder before configuring the MFP<\/h2>\n<ol>\n<li>On another computer on the same network, open File Explorer.<\/li>\n<li>Enter the following path in the address bar, replacing the IP address with the address of the computer that hosts the folder:<\/li>\n<\/ol>\n<pre style=\"background: #f6f7f7; border: 1px solid #dcdcde; overflow: auto; padding: 12px;\"><code>\\\\192.168.1.100\\Scans<\/code><\/pre>\n<ol start=\"3\">\n<li>When Windows asks for credentials, enter <strong>COMPUTER-NAME\\oki-scan<\/strong> and the password of the account you created.<\/li>\n<li>Create a small text file in the folder.<\/li>\n<li>Delete this file.<\/li>\n<\/ol>\n<p>If the folder opens but you cannot create or delete a file, correct the permissions on the <strong>Sharing<\/strong> and <strong>Security<\/strong> tabs. If another computer cannot open the path at all, it is too early to configure the MFP profile: check the IP address, Server service, firewall and port 445.<\/p>\n<p>You can check the port from PowerShell on another computer:<\/p>\n<pre style=\"background: #f6f7f7; border: 1px solid #dcdcde; overflow: auto; padding: 12px;\"><code>Test-NetConnection 192.168.1.100 -Port 445<\/code><\/pre>\n<p>The value <strong>TcpTestSucceeded : True<\/strong> confirms that the port is accessible. It does not confirm SMB version compatibility, the user name, or write permissions.<\/p>\n<h2>Create a CIFS profile through the OKI web page<\/h2>\n<ol>\n<li>On the MFP, press <strong>SETTING<\/strong>.<\/li>\n<li>Open <strong>Reports &gt; Configuration<\/strong> and print the configuration.<\/li>\n<li>Find the MFP&#8217;s IPv4 address, for example <strong>192.168.1.50<\/strong>.<\/li>\n<li>On the computer, enter this address in a browser: <strong>http:\/\/192.168.1.50<\/strong>.<\/li>\n<li>Open the administrator login.<\/li>\n<li>In the user name field, enter <strong>root<\/strong>, and in the password field enter the current device administrator password.<\/li>\n<li>After signing in, open <strong>List &gt; Profile<\/strong>.<\/li>\n<li>Select an unused profile number and click <strong>New<\/strong>.<\/li>\n<\/ol>\n<p>Fill in the profile as follows:<\/p>\n<table style=\"border-collapse: collapse; width: 100%; margin: 18px 0;\">\n<thead>\n<tr>\n<th style=\"border: 1px solid #c9c9c9; padding: 9px; text-align: left;\">Field<\/th>\n<th style=\"border: 1px solid #c9c9c9; padding: 9px; text-align: left;\">Example<\/th>\n<th style=\"border: 1px solid #c9c9c9; padding: 9px; text-align: left;\">Important<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\"><strong>Profile Name<\/strong><\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Windows Scan<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">This name will be visible on the MFP control panel.<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\"><strong>Protocol<\/strong><\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">CIFS<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Do not select FTP or HTTP for a Windows shared folder.<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\"><strong>Target URL<\/strong><\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">\\\\192.168.1.100\\Scans<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Enter a UNC path, not C:\\Scans, not smb:\/\/&#8230;, and not a web-page address.<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\"><strong>Port No.<\/strong><\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">445<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">The standard CIFS port for this profile.<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\"><strong>User Name<\/strong><\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">oki-scan<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">If sign-in fails, try COMPUTER-NAME\\oki-scan. The field allows up to 32 characters.<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\"><strong>Password<\/strong><\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">oki-scan password<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Not the Windows PIN. The field allows up to 32 characters.<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\"><strong>CIFS Character Set<\/strong><\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">UTF-16<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Leave the default value.<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\"><strong>Encode Communication<\/strong><\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">None<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Encryption is not available for CIFS in this field.<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\"><strong>File Name<\/strong><\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Scan#d<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">#d adds the date, while #n adds a sequential number and prevents duplicate-name conflicts.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<ol start=\"9\">\n<li>Click <strong>Submit<\/strong> or the save button.<\/li>\n<li>Wait for confirmation. Moving to another page before submitting the form may discard the entered values.<\/li>\n<\/ol>\n<p>If there is no working DNS or NetBIOS name resolution on the network, use the IP address in Target URL. The path <strong>\\\\PC1\\Scans<\/strong> depends on name resolution, while <strong>\\\\192.168.1.100\\Scans<\/strong> does not.<\/p>\n<h2>Start Scan to Shared Folder from the control panel<\/h2>\n<ol>\n<li>Place the document in the ADF or on the platen glass.<\/li>\n<li>Press <strong>SCAN<\/strong>.<\/li>\n<li>Select <strong>Shared Folder<\/strong> and press OK.<\/li>\n<li>Open <strong>Select Profile<\/strong>.<\/li>\n<li>Select the <strong>Windows Scan<\/strong> profile you created.<\/li>\n<li>For the first test, select A4, PDF, 300 dpi and simplex scanning.<\/li>\n<li>Press the monochrome or color start button.<\/li>\n<li>Check whether the file appears in C:\\Scans.<\/li>\n<\/ol>\n<p>If the profile is not displayed, it was not saved, was created under another number, or the wrong control-panel section is open. If the profile is displayed but the job ends with an error, compare when the error occurs with the table below.<\/p>\n<h2>What the MFP behavior means during testing<\/h2>\n<table style=\"border-collapse: collapse; width: 100%; margin: 18px 0;\">\n<thead>\n<tr>\n<th style=\"border: 1px solid #c9c9c9; padding: 9px; text-align: left;\">Symptom<\/th>\n<th style=\"border: 1px solid #c9c9c9; padding: 9px; text-align: left;\">Most likely cause<\/th>\n<th style=\"border: 1px solid #c9c9c9; padding: 9px; text-align: left;\">What to do<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">CIFS connection error appears almost immediately<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Incorrect IP address, path, port, firewall setting, or incompatible SMB version<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Check Target URL, TCP port 445 availability, and the SMB1 section.<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Login error or Authentication Error<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">A PIN was entered, the password is incorrect, or the user-name format is unsuitable<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Enter the local account password; check oki-scan and COMPUTER-NAME\\oki-scan.<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Access denied or the file is not created<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Insufficient share or NTFS permissions<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Assign Change\/Read again on the Sharing tab and Modify\/Write on the Security tab.<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">The folder works by IP address but not by computer name<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">DNS or NetBIOS cannot resolve the computer name<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Keep the IP address in the profile and reserve it in DHCP.<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Scanning stopped working after the router was restarted<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">The computer received a different IP address<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Correct Target URL and create a DHCP reservation.<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Scanning works only while the computer is active<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Sleep, hibernation or network-adapter power saving<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Do not put the storage computer to sleep while it is in use and check the network adapter power settings.<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">The first file is saved, but the next one is not<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">An existing file has the same name<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Add #n or #d to the File Name field.<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">After a fresh installation of Windows 10 or Windows 11, the path and password are correct but there is no connection<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">The SMB1 server is missing<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Update the MFP firmware first, then choose a secure compatibility option.<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">The error appeared only after Windows 11 24H2<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Mandatory SMB signing and the existing SMB1 incompatibility may be involved<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">First determine the SMB version supported by the MFP; then check the server-side signing setting, not the client-side setting.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>Update the firmware before changing Windows security settings<\/h2>\n<p>Before enabling an outdated protocol, install the current firmware for your model. Update pages are available for <a href=\"https:\/\/www.oki.com\/eu\/printing\/support\/firmware\/mono-multifunction\/45762102\/\" target=\"_blank\" rel=\"noopener\">OKI MB472dnw<\/a>, <a href=\"https:\/\/www.oki.com\/eu\/printing\/support\/firmware\/mono-multifunction\/45762112\/\" target=\"_blank\" rel=\"noopener\">OKI MB492dn<\/a> and <a href=\"https:\/\/www.oki.com\/eu\/printing\/support\/firmware\/mono-multifunction\/45762122\/\" target=\"_blank\" rel=\"noopener\">OKI MB562dnw<\/a>. Select your exact model and use the latest Firmware Update Tool.<\/p>\n<ol>\n<li>Write down the current network settings and the MFP administrator password.<\/li>\n<li>Connect the computer and MFP to a stable network.<\/li>\n<li>Close all print and scan jobs.<\/li>\n<li>Run Firmware Update Tool as administrator.<\/li>\n<li>Select only your device.<\/li>\n<li>Do not turn off the MFP, computer or network equipment until the update is complete.<\/li>\n<li>After the restart, check the CIFS profile again.<\/li>\n<\/ol>\n<p>The mere availability of newer firmware does not prove that SMB2 or SMB3 has been added: this must be stated in the release notes for the specific version or confirmed by network testing. Updating comes first because using the latest available implementation is safer than immediately weakening Windows security.<\/p>\n<h2>Why modern versions of Windows do not accept an SMB1 connection<\/h2>\n<p>The <a href=\"https:\/\/www.oki.com\/printing\/online-manuals-12\/458222\/id\/contents\/contents\/am_000050.html\" target=\"_blank\" rel=\"noopener\">network specifications for this platform<\/a> list SMB 1.0. The <a href=\"https:\/\/learn.microsoft.com\/en-us\/windows-server\/storage\/file-server\/troubleshoot\/smbv1-not-installed-by-default-in-windows\" target=\"_blank\" rel=\"noopener\">current Windows SMB1 documentation<\/a> states that the SMB1 server is not installed by default on clean installations of modern Windows 10 releases, while Windows 11 does not include either the SMB1 client or server by default.<\/p>\n<p>This does not mean that SMB1 should automatically be enabled on the main work computer. The protocol is outdated and does not provide a modern level of security. The recommended order of options is:<\/p>\n<ol>\n<li>Update the firmware and repeat the test.<\/li>\n<li>If the device remains compatible only with SMB1, use Scan to Email, Scan to USB or scanning to the computer through ActKey\/TWAIN.<\/li>\n<li>If a network folder is mandatory, use a separate file server or NAS where SMB1 access can be restricted to a separate trusted subnet, one account and one folder.<\/li>\n<li>Enable SMB1 Server on a Windows computer only as a temporary or isolated option, while understanding the risk.<\/li>\n<\/ol>\n<h2>How to enable only SMB1 Server in Windows \u2014 last resort<\/h2>\n<div style=\"background-color: #fff1f0; border-left: 5px solid #d63638; margin: 20px 0; padding: 14px 18px;\">\n<p style=\"margin: 0 0 8px;\"><strong>This reduces the security of the computer<\/strong><\/p>\n<p style=\"margin: 0;\">Do not perform these steps on a public, guest or untrusted network. Do not use them on a laptop that regularly connects to networks you do not control. For permanent use, it is safer to dedicate a separate storage device or choose another scanning method.<\/p>\n<\/div>\n<p>The path to the component is the same in Windows 10 and Windows 11:<\/p>\n<ol>\n<li>Press <strong>Win + R<\/strong>.<\/li>\n<li>Enter <strong>optionalfeatures.exe<\/strong> and press Enter.<\/li>\n<li>Find <strong>SMB 1.0\/CIFS File Sharing Support<\/strong>.<\/li>\n<li>Expand this item.<\/li>\n<li>Enable only <strong>SMB 1.0\/CIFS Server<\/strong>.<\/li>\n<li>Do not enable <strong>SMB 1.0\/CIFS Client<\/strong> unless the computer itself needs to connect to old SMB storage.<\/li>\n<li>Confirm installation of the component and restart the computer.<\/li>\n<li>Make sure the network remains private and that the SMB rule is allowed only for the local subnet.<\/li>\n<li>Repeat scanning from the OKI control panel.<\/li>\n<\/ol>\n<p>If the feature is no longer needed, open <strong>optionalfeatures.exe<\/strong> again, clear the <strong>SMB 1.0\/CIFS Server<\/strong> check box and restart the computer. Do not leave the outdated server enabled \u201cjust in case\u201d.<\/p>\n<h2>Windows 11 24H2: do not confuse the SMB version with SMB signing<\/h2>\n<p>In Windows 11 24H2 Pro, Enterprise and Education editions, incoming and outgoing SMB connections require signing by default. This is a separate integrity check, not a protocol version. Disabling the signing requirement does not add SMB1 support, and enabling SMB1 Server does not guarantee that an old client can sign the connection.<\/p>\n<p>This section is relevant only after updating the firmware and checking the path, port, password and permissions. On the Windows computer that receives scans:<\/p>\n<ol>\n<li>Press <strong>Win + R<\/strong>, enter <strong>winver<\/strong> and check the Windows version.<\/li>\n<li>Open PowerShell as administrator.<\/li>\n<li>Check the signing requirement for the SMB server:<\/li>\n<\/ol>\n<pre style=\"background: #f6f7f7; border: 1px solid #dcdcde; overflow: auto; padding: 12px;\"><code>Get-SmbServerConfiguration | Format-List RequireSecuritySignature<\/code><\/pre>\n<p>If <strong>True<\/strong> is displayed, Windows requires signing from the device that writes the file. Do not change <strong>Set-SmbClientConfiguration<\/strong>: this command applies to outgoing connections from the computer itself and does not fix an incoming scan.<\/p>\n<p>It is recommended to leave signing enabled and use a compatible server or another scanning method. Only for a diagnostic test on an isolated trusted network can the requirement on the receiving computer be temporarily disabled:<\/p>\n<pre style=\"background: #f6f7f7; border: 1px solid #dcdcde; overflow: auto; padding: 12px;\"><code>Set-SmbServerConfiguration -RequireSecuritySignature $false<\/code><\/pre>\n<p>Confirm the change, perform one test and do not disable the firewall. If scanning starts working, the cause is related to SMB signing. This does not make the weakened configuration suitable for permanent use. Restore the signing requirement with:<\/p>\n<pre style=\"background: #f6f7f7; border: 1px solid #dcdcde; overflow: auto; padding: 12px;\"><code>Set-SmbServerConfiguration -RequireSecuritySignature $true<\/code><\/pre>\n<p>The signing requirements and Windows 11 24H2 edition differences are described in the <a href=\"https:\/\/learn.microsoft.com\/en-us\/windows-server\/storage\/file-server\/smb-signing\" target=\"_blank\" rel=\"noopener\">SMB signing settings<\/a>. If using the older MFP requires SMB1, disabling signing and weak authentication at the same time, do not use the main computer as permanent scan storage.<\/p>\n<h2>If the password and SMB are configured but sign-in is still rejected<\/h2>\n<ol>\n<li>Enter the password in the profile manually again. After the Windows password is changed, the old value remains stored in the MFP.<\/li>\n<li>First try the name <strong>oki-scan<\/strong>, then <strong>COMPUTER-NAME\\oki-scan<\/strong>.<\/li>\n<li>For a domain account, try the format <strong>user@domain<\/strong>. If it does not work, use the format specified by the domain administrator and check Workgroup\/NBT in the MFP network settings.<\/li>\n<li>Make sure the user name and password do not exceed 32 characters.<\/li>\n<li>Do not weaken LAN Manager, NTLM or guest sign-in settings without precisely confirming the cause. If Windows rejects the MFP&#8217;s outdated authentication method, it is safer to use a separate compatible server or another scan delivery method.<\/li>\n<\/ol>\n<h2>When it is better to stop using a Windows shared folder<\/h2>\n<p>Scan to Shared Folder is convenient when the current MFP firmware is compatible with a secure file-server configuration. If connecting requires enabling SMB1 on the main computer, disabling mandatory signing or allowing weak authentication, choose one of the following options:<\/p>\n<ul>\n<li><strong>Scan to Email<\/strong> \u2014 to send the document to a recipient or a dedicated mailbox;<\/li>\n<li><strong>Scan to USB Memory<\/strong> \u2014 when a network connection is not required;<\/li>\n<li><strong>ActKey, TWAIN or WIA<\/strong> \u2014 when scanning can be started from the computer;<\/li>\n<li><strong>a separate NAS or file server<\/strong> \u2014 when a centralized folder is required and outdated access can be isolated from the rest of the network.<\/li>\n<\/ul>\n<p>This choice eliminates not only the current CIFS error but also dependence on security changes in future Windows updates.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>If an OKI MB472, MB492 or MB562 can copy and print but cannot save scans to a Windows network folder, reinstalling the scanner driver usually will not help. When using Scan to Shared Folder, the MFP connects directly to the&hellip;<\/p>\n<p class=\"more-link-p\"><a class=\"more-link\" href=\"https:\/\/drivernew.com\/?p=78741\">Read more &rarr;<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_lmt_disableupdate":"","_lmt_disable":"","footnotes":""},"categories":[36],"tags":[],"class_list":["post-78741","post","type-post","status-publish","format-standard","hentry","category-oki-printer"],"modified_by":"DriverNew","_links":{"self":[{"href":"https:\/\/drivernew.com\/index.php?rest_route=\/wp\/v2\/posts\/78741","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/drivernew.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/drivernew.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/drivernew.com\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/drivernew.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=78741"}],"version-history":[{"count":1,"href":"https:\/\/drivernew.com\/index.php?rest_route=\/wp\/v2\/posts\/78741\/revisions"}],"predecessor-version":[{"id":78742,"href":"https:\/\/drivernew.com\/index.php?rest_route=\/wp\/v2\/posts\/78741\/revisions\/78742"}],"wp:attachment":[{"href":"https:\/\/drivernew.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=78741"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/drivernew.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=78741"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/drivernew.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=78741"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}