{"id":78727,"date":"2026-08-16T10:22:02","date_gmt":"2026-08-16T07:22:02","guid":{"rendered":"https:\/\/drivernew.com\/?p=78727"},"modified":"2026-08-16T10:22:02","modified_gmt":"2026-08-16T07:22:02","slug":"oki-mb472-mb492-and-mb562-fax-cannot-be-sent-or-received-line-tel-reception-mode-and-communication-error","status":"publish","type":"post","link":"https:\/\/drivernew.com\/?p=78727","title":{"rendered":"OKI MB472, MB492 and MB562: Fax Cannot Be Sent or Received \u2014 LINE\/TEL, Reception Mode and Communication Error"},"content":{"rendered":"<p>If your OKI MB472, MB492 or MB562 displays <strong>Communication Error<\/strong>, does not send a document, or does not receive an incoming fax, the problem is usually not related to the driver. Check the code in the fax journal, the telephone cable connection, the selected reception mode, and the type of telephone line.<\/p>\n<p>This problem is especially common after connecting the MFP to an office PBX, ADSL modem, optical network terminal, or the telephone port of a router. In such cases, normal voice calls may work while fax transmission is interrupted.<\/p>\n<div style=\"background-color: #eef6ff; border-left: 5px solid #2271b1; margin: 20px 0; padding: 14px 18px;\">\n<p style=\"margin: 0 0 8px;\"><strong>Where the actions are performed<\/strong><\/p>\n<p style=\"margin: 0;\">The main checks and settings are performed on the MFP control panel and near the <strong>LINE<\/strong> and <strong>TEL<\/strong> connectors. Printer settings in Windows 10 and Windows 11 do not control a fax sent from the OKI control panel. You do not need to reinstall the PCL6 or PS print driver for this check.<\/p>\n<\/div>\n<h2>Models covered by this guide<\/h2>\n<p>This guide applies to the following monochrome MFPs with fax functionality:<\/p>\n<ul>\n<li>OKI MB472dn, MB472dnw and MB472w;<\/li>\n<li>OKI MB492dn;<\/li>\n<li>OKI MB562dnw;<\/li>\n<li>OKI ES4172LP MFP and ES4192dn MFP;<\/li>\n<li>OKI ES5162dnw MFP and ES5162LP MFP.<\/li>\n<\/ul>\n<p>The OKI MB472 uses a button-based control panel. The MB492 and MB562 have a touch panel. Therefore, the paths to some settings are listed separately. The names of individual menu items may also differ slightly depending on the model and firmware version.<\/p>\n<h2>Symptoms related to this problem<\/h2>\n<ul>\n<li>after pressing <strong>START<\/strong>, the machine does not dial the number;<\/li>\n<li>the control panel displays <strong>Communication Error<\/strong> or <strong>Tx Communication Error<\/strong>;<\/li>\n<li>the MFP redials several times and then cancels the job;<\/li>\n<li>outgoing faxes work, but incoming faxes are not received;<\/li>\n<li>an incoming call can be heard on the telephone, but the MFP does not answer;<\/li>\n<li>the fax is received into memory but is not printed;<\/li>\n<li>a connection is established, but transmission stops on the first page or one of the following pages;<\/li>\n<li>the error appeared after connecting the machine to a PBX, router, ADSL modem, or optical network terminal.<\/li>\n<\/ul>\n<p>Do not change several settings at once. First print the journal and write down the code for the most recent failed operation. Otherwise, it will be difficult to determine which action actually fixed the problem.<\/p>\n<h2>Step 1. Print the transmission and reception journal<\/h2>\n<p>The journal contains the results of the last 50 fax jobs. If an operation ended with an error, the corresponding row contains a code. An empty cell in the code column means that transmission or reception completed successfully.<\/p>\n<h3>OKI MB472<\/h3>\n<p><strong>Where the actions are performed:<\/strong> on the MFP button-based control panel.<\/p>\n<ol>\n<li>Press the <strong>SETTING<\/strong> button.<\/li>\n<li>Use the arrow buttons to select <strong>Reports<\/strong> and press <strong>OK<\/strong>.<\/li>\n<li>Select the <strong>Fax<\/strong> category and press <strong>OK<\/strong>.<\/li>\n<li>Select <strong>Fax Tx\/Fax Rx<\/strong> and press <strong>OK<\/strong>.<\/li>\n<li>On the confirmation screen, select <strong>Yes<\/strong> and press <strong>OK<\/strong>.<\/li>\n<\/ol>\n<h3>OKI MB492 and MB562<\/h3>\n<p><strong>Where the actions are performed:<\/strong> on the MFP touch panel.<\/p>\n<ol>\n<li>Press <strong>Device Settings<\/strong>.<\/li>\n<li>Press <strong>Reports<\/strong>.<\/li>\n<li>Select the <strong>Fax<\/strong> category.<\/li>\n<li>Press <strong>Fax Tx\/Rx Journal<\/strong>.<\/li>\n<li>On the confirmation screen, press <strong>Yes<\/strong>.<\/li>\n<\/ol>\n<p>If the machine asks you to log in as an administrator, enter the current administrator name and password. On a device with unchanged factory credentials, the name is <strong>admin<\/strong> and the password is <strong>aaaaaa<\/strong>. If the password was changed previously, the factory value will no longer work.<\/p>\n<h2>How to understand a code in the fax journal<\/h2>\n<p>Find the latest row with the required recipient number and the transmission or reception time. Then compare the code with the following table.<\/p>\n<table style=\"border-collapse: collapse; width: 100%; margin: 18px 0;\">\n<thead>\n<tr>\n<th style=\"border: 1px solid #c9c9c9; padding: 9px; text-align: left;\">Code<\/th>\n<th style=\"border: 1px solid #c9c9c9; padding: 9px; text-align: left;\">Meaning<\/th>\n<th style=\"border: 1px solid #c9c9c9; padding: 9px; text-align: left;\">What to check<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\"><strong>14<\/strong><\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Memory is full, fax was not received<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Paper, paper jams, and documents stored in memory<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\"><strong>21<\/strong><\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Line error detected<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">The telephone line; if the error repeatedly occurs on a working analog line, the MFP fax modem<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\"><strong>22, 23<\/strong><\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">The remote machine did not answer<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">The number, the condition of the recipient&#8217;s line, and the <strong>MF(Tone)\/DP(Pulse)<\/strong> setting<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\"><strong>24, 25<\/strong><\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">The cable is connected to the wrong port or is not detected<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Make sure the incoming line is connected to <strong>LINE<\/strong>, not <strong>TEL<\/strong><\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\"><strong>26<\/strong><\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Dial tone is not detected<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">The <strong>PBX Line<\/strong> setting and the connection to the PBX or telephone adapter<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\"><strong>27<\/strong><\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">The line remained busy during redialing<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">An off-hook handset, a parallel telephone, and the <strong>Busy Tone Detection<\/strong> setting<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\"><strong>32, 40, 43, 45\u201347, 49, 52, 60, 66\u201369, 6a, 82, 83<\/strong><\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">The connection was interrupted or could not be established in Super G3 mode<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Line quality; after completing the other checks, set <strong>Super G3 \u2192 OFF<\/strong><\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\"><strong>48<\/strong><\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">The recipient&#8217;s machine could not receive the fax<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Whether the recipient&#8217;s fax is ready, has paper, and has enough free memory<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\"><strong>4a, 4b<\/strong><\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Transmission or reception is blocked by a security function<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">ID checking and the unwanted fax blocking list<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\"><strong>80<\/strong><\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">An MFP fax modem error was detected<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">The machine requires service diagnostics<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\"><strong>84<\/strong><\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Connection timed out<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Line quality; reduce the resolution or split a large document<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\"><strong>90<\/strong><\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Incorrect dialing prefix<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">The prefix used to access an outside line<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>A full explanation is available in the <a href=\"https:\/\/www.oki.com\/printing\/online-manuals-28\/458222\/id\/contents\/contents\/qa_000036.html\" target=\"_blank\" rel=\"noopener\">OKI fax code table<\/a>. For initial troubleshooting, the codes listed above are usually sufficient.<\/p>\n<h2>Step 2. Check the LINE and TEL connectors<\/h2>\n<p><strong>Where the actions are performed:<\/strong> near the telephone connectors on the rear of the MFP. You do not need to turn off the computer.<\/p>\n<ol>\n<li>Locate the <strong>LINE<\/strong> and <strong>TEL<\/strong> connectors on the rear of the machine.<\/li>\n<li>Trace where each telephone cable goes.<\/li>\n<li>The cable from the wall telephone socket, PBX, ADSL splitter, router, or telephone adapter must be connected to <strong>LINE<\/strong>.<\/li>\n<li>An external telephone or answering machine must be connected to <strong>TEL<\/strong>.<\/li>\n<li>Disconnect the plug from <strong>LINE<\/strong> and then firmly insert it again. It should lock into place with the retaining clip.<\/li>\n<li>Inspect the cable. If the plug is broken or the cable is pinched or damaged, replace it with a working telephone cable of the appropriate type.<\/li>\n<\/ol>\n<div style=\"background-color: #fffbf0; border-left: 5px solid #ff9800; margin: 20px 0; padding: 14px 18px;\">\n<p style=\"margin: 0 0 8px;\"><strong>Do not interchange LINE and TEL<\/strong><\/p>\n<p style=\"margin: 0;\">The <strong>LINE<\/strong> connector receives the signal from the telephone line. The <strong>TEL<\/strong> connector is intended only for an external telephone. If the incoming line is connected to <strong>TEL<\/strong>, code <strong>24<\/strong> or <strong>25<\/strong> usually appears in the journal.<\/p>\n<\/div>\n<p>Do not connect an external telephone in parallel with the MFP using an ordinary splitter. During transmission, an off-hook handset can interfere with the fax signal or interrupt the connection. Connect one external telephone through the <strong>TEL<\/strong> connector. If that telephone also has a built-in fax, disable automatic fax reception on it.<\/p>\n<p>Detailed connection options are shown in the <a href=\"https:\/\/www.oki.com\/printing\/online-manuals-28\/458222\/id\/contents\/contents\/su_000009.html\" target=\"_blank\" rel=\"noopener\">OKI section about connecting the telephone line<\/a>.<\/p>\n<h2>Step 3. Check the telephone line itself<\/h2>\n<p><strong>Where the actions are performed:<\/strong> at the wall telephone socket, PBX, or telephone adapter. The MFP control panel is not used yet.<\/p>\n<ol>\n<li>Disconnect from the MFP the cable that was connected to <strong>LINE<\/strong>.<\/li>\n<li>Connect this cable to a working standard telephone.<\/li>\n<li>Pick up the handset and check for a continuous dial tone.<\/li>\n<li>Make an outgoing voice call.<\/li>\n<li>Call this number from another telephone and check the incoming call.<\/li>\n<li>After the test, reconnect the same cable to the MFP&#8217;s <strong>LINE<\/strong> connector.<\/li>\n<\/ol>\n<p>If there is no dial tone or the voice call is interrupted, troubleshoot the line first. Contact the PBX administrator or telephone service provider. Changing OKI menu settings will not restore a missing telephone signal.<\/p>\n<p>If voice communication works only through a router or separate terminal, the machine is receiving a converted IP telephony signal rather than a direct analog line. In this case, you may later need to disable <strong>Super G3<\/strong>.<\/p>\n<h2>Step 4. Send a test fax to a known working number<\/h2>\n<p><strong>Where the actions are performed:<\/strong> on the MFP control panel. For the test, use one A4 sheet with the word \u201cTest\u201d printed in large letters.<\/p>\n<h3>OKI MB472<\/h3>\n<ol>\n<li>Place the test page in the ADF face up or on the document glass face down.<\/li>\n<li>Press the physical <strong>FAX<\/strong> button.<\/li>\n<li>Select <strong>Fax<\/strong> and press <strong>OK<\/strong> if the machine displays a fax type selection.<\/li>\n<li>Select manual number entry.<\/li>\n<li>Enter the full number of a known working fax, including the area code and any required prefix.<\/li>\n<li>Check the entered digits and press <strong>START<\/strong>.<\/li>\n<\/ol>\n<h3>OKI MB492 and MB562<\/h3>\n<ol>\n<li>Place the test page in the ADF face up or on the document glass face down.<\/li>\n<li>On the touch panel, press <strong>Fax\/Internet Fax<\/strong> or press the physical <strong>FAX<\/strong> button.<\/li>\n<li>Press <strong>Fax<\/strong>.<\/li>\n<li>Press <strong>Manual Dial<\/strong>.<\/li>\n<li>Enter the recipient&#8217;s number and press <strong>OK<\/strong>.<\/li>\n<li>Press <strong>START<\/strong>.<\/li>\n<\/ol>\n<p>For the first test, do not use a number from the phone book. This eliminates an error in a saved entry. If the machine sends a fax to one number but not another, check whether the recipient&#8217;s machine is ready and whether its number is correct.<\/p>\n<p>When sending manually with an external telephone, do not hang up before pressing <strong>START<\/strong>. First press <strong>START<\/strong>, wait for transmission to begin, and only then end the voice call.<\/p>\n<h2>If code 22 or 23 is shown in the journal<\/h2>\n<p>Codes <strong>22<\/strong> and <strong>23<\/strong> mean that the remote fax did not answer. The cause may be a busy line, an incorrect number, the recipient&#8217;s machine being turned off, or an incorrect dialing method.<\/p>\n<ol>\n<li>Compare the dialed number with the number provided by the recipient.<\/li>\n<li>Make sure an additional digit, such as 0 or 9, is not required to access an outside line.<\/li>\n<li>Call the number from a standard telephone and make sure a fax machine answers rather than a voice menu.<\/li>\n<li>Wait a few minutes and try sending again: the recipient&#8217;s line may have been busy.<\/li>\n<li>If the error occurs with every number, check the <strong>MF(Tone)\/DP(Pulse)<\/strong> setting.<\/li>\n<\/ol>\n<h2>How to check MF(Tone)\/DP(Pulse) on OKI MB472<\/h2>\n<p><strong>Where the actions are performed:<\/strong> in the administration menu on the MFP button-based control panel.<\/p>\n<ol>\n<li>Press <strong>SETTING<\/strong>.<\/li>\n<li>Select <strong>Admin Setup<\/strong> and press <strong>OK<\/strong>.<\/li>\n<li>Enter the current administrator password, select <strong>Enter<\/strong>, and press <strong>OK<\/strong>.<\/li>\n<li>Select <strong>User Install<\/strong> and press <strong>OK<\/strong>.<\/li>\n<li>Select <strong>MF(Tone)\/DP(Pulse)<\/strong> and press <strong>OK<\/strong>.<\/li>\n<li>For a modern push-button telephone line, select <strong>Tone<\/strong>.<\/li>\n<li>Select <strong>Pulse<\/strong> only if the telephone line actually uses pulse dialing.<\/li>\n<li>Press <strong>OK<\/strong> and return to the main screen.<\/li>\n<\/ol>\n<h2>How to check MF(Tone)\/DP(Pulse) on OKI MB492 and MB562<\/h2>\n<p><strong>Where the actions are performed:<\/strong> in the administration menu on the MFP touch panel.<\/p>\n<ol>\n<li>Press <strong>Device Settings<\/strong>.<\/li>\n<li>Switch the screen and press <strong>Admin Setup<\/strong>.<\/li>\n<li>Enter the current administrator name and password and press <strong>OK<\/strong>.<\/li>\n<li>Press <strong>User Install<\/strong>.<\/li>\n<li>Press <strong>MF(Tone)\/DP(Pulse)<\/strong>.<\/li>\n<li>For a normal modern telephone line, select <strong>Tone<\/strong>.<\/li>\n<li>Press <strong>Back<\/strong> until the main screen appears.<\/li>\n<\/ol>\n<p>After changing the setting, perform another test transmission and check the journal again. If code <strong>23<\/strong> appears only when calling one recipient, there is no need to switch the setting back to another value: the problem is most likely on that recipient&#8217;s side.<\/p>\n<h2>If code 26 is shown in the journal: configure the PBX line<\/h2>\n<p>Code <strong>26<\/strong> means that the machine did not detect a dial tone. This often occurs when it is connected to an office extension, PBX, telephone adapter, or some IP telephony devices.<\/p>\n<h3>OKI MB472<\/h3>\n<p><strong>Where the actions are performed:<\/strong> in the administration menu on the MFP button-based control panel.<\/p>\n<ol>\n<li>Press <strong>SETTING<\/strong>.<\/li>\n<li>Select <strong>Admin Setup<\/strong> and press <strong>OK<\/strong>.<\/li>\n<li>Enter the current administrator password and confirm the login.<\/li>\n<li>Select <strong>Fax Setup<\/strong>.<\/li>\n<li>Select <strong>Fax Settings<\/strong>.<\/li>\n<li>Select <strong>PBX Line<\/strong>.<\/li>\n<li>Set it to <strong>Enable<\/strong> and press <strong>OK<\/strong>.<\/li>\n<li>Return to the main screen and try sending again.<\/li>\n<\/ol>\n<h3>OKI MB492 and MB562<\/h3>\n<p><strong>Where the actions are performed:<\/strong> in the administration menu on the MFP touch panel.<\/p>\n<ol>\n<li>Press <strong>Device Settings<\/strong>.<\/li>\n<li>Press <strong>Admin Setup<\/strong> and log in.<\/li>\n<li>Press <strong>Fax Setup<\/strong>.<\/li>\n<li>Open <strong>Fax Settings<\/strong>.<\/li>\n<li>Press <strong>PBX Line<\/strong>.<\/li>\n<li>Set it to <strong>ON<\/strong>.<\/li>\n<li>Return to the main screen and send the test page.<\/li>\n<\/ol>\n<div style=\"background-color: #fffbf0; border-left: 5px solid #ff9800; margin: 20px 0; padding: 14px 18px;\">\n<p style=\"margin: 0 0 8px;\"><strong>When you should not enable PBX Line<\/strong><\/p>\n<p style=\"margin: 0;\">If the MFP is connected directly to a normal analog public telephone line and dialing already works, leave <strong>PBX Line<\/strong> disabled. This setting is intended for internal telephone systems and some adapters, not for fixing every fax error.<\/p>\n<\/div>\n<h2>If you need to dial 0 or 9 to access an outside line<\/h2>\n<p>An office PBX may require a prefix before the public telephone number. Ask the telephone system administrator for the correct prefix. Do not copy the digit from the example: it may be different in your organization.<\/p>\n<h3>OKI MB472<\/h3>\n<p><strong>Where the actions are performed:<\/strong> in the administration menu on the MFP button-based control panel.<\/p>\n<ol>\n<li>Press <strong>SETTING<\/strong>.<\/li>\n<li>Open <strong>Admin Setup<\/strong> and log in.<\/li>\n<li>Select <strong>Fax Setup<\/strong>.<\/li>\n<li>Open <strong>Other Settings<\/strong>.<\/li>\n<li>Select <strong>Prefix<\/strong>.<\/li>\n<li>Enter the digit or sequence used to access an outside line.<\/li>\n<li>Confirm the value and return to the main screen.<\/li>\n<\/ol>\n<h3>OKI MB492 and MB562<\/h3>\n<p><strong>Where the actions are performed:<\/strong> in the administration menu on the MFP touch panel.<\/p>\n<ol>\n<li>Press <strong>Device Settings<\/strong>.<\/li>\n<li>Open <strong>Admin Setup<\/strong> and log in.<\/li>\n<li>Press <strong>Fax Setup<\/strong>.<\/li>\n<li>Press <strong>Other Settings<\/strong>.<\/li>\n<li>Switch the screen and press <strong>Prefix<\/strong>.<\/li>\n<li>Enter the required digits and press <strong>OK<\/strong>.<\/li>\n<li>Press <strong>Back<\/strong> until the main screen appears.<\/li>\n<\/ol>\n<p>When dialing manually on the touch panel, the saved prefix is added using the <strong>Prefix:N<\/strong> button. Then enter the recipient&#8217;s main number. Code <strong>90<\/strong> indicates that the saved or entered prefix is incorrect.<\/p>\n<h2>If code 27 is shown in the journal<\/h2>\n<p>First make sure the line is actually free:<\/p>\n<ol>\n<li>Hang up the external telephone handset.<\/li>\n<li>Disconnect any telephones and splitters connected in parallel.<\/li>\n<li>Wait a few minutes and try sending again.<\/li>\n<li>If the line is free but code <strong>27<\/strong> appears every time you dial through a PBX or telephone adapter, temporarily disable busy tone detection.<\/li>\n<\/ol>\n<h3>OKI MB472<\/h3>\n<p><strong>Where the actions are performed:<\/strong> <strong>SETTING \u2192 Admin Setup \u2192 User Install \u2192 Busy Tone Detection<\/strong>. Set it to <strong>OFF<\/strong>.<\/p>\n<h3>OKI MB492 and MB562<\/h3>\n<p><strong>Where the actions are performed:<\/strong> <strong>Device Settings \u2192 Admin Setup \u2192 User Install \u2192 Busy Tone Detection<\/strong>. Set it to <strong>OFF<\/strong>.<\/p>\n<p>Do not disable this setting if the machine correctly detects a busy line. After changing it, carefully check the number being dialed: the MFP will no longer be able to use the previous busy signal for normal line status detection.<\/p>\n<h2>Step 5. Select the correct reception mode<\/h2>\n<p>If outgoing faxes work but incoming faxes are not received, first check <strong>Reception Mode<\/strong>. The required option depends on whether the line is used only for fax, shared with a telephone, or shared with an answering machine.<\/p>\n<table style=\"border-collapse: collapse; width: 100%; margin: 18px 0;\">\n<thead>\n<tr>\n<th style=\"border: 1px solid #c9c9c9; padding: 9px; text-align: left;\">How the line is used<\/th>\n<th style=\"border: 1px solid #c9c9c9; padding: 9px; text-align: left;\">MB472<\/th>\n<th style=\"border: 1px solid #c9c9c9; padding: 9px; text-align: left;\">MB492 and MB562<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">The line is used only for automatic fax reception<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\"><strong>Fax Ready Mode<\/strong><\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\"><strong>Fax Ready Mode<\/strong><\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">One line is shared by a telephone and fax<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\"><strong>Tel\/Fax Ready Mode<\/strong><\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\"><strong>Tel\/Fax Ready Mode<\/strong><\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">An external answering machine is connected to the line<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\"><strong>Ans\/Fax Ready Mode<\/strong><\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\"><strong>Ans\/Fax Ready Mode<\/strong><\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">Calls are normally answered by a person; fax reception is started manually<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\"><strong>Tel Ready Mode<\/strong><\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\"><strong>Tel Ready Mode<\/strong><\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\">A distinctive ring service is enabled<\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\"><strong>DRD<\/strong><\/td>\n<td style=\"border: 1px solid #c9c9c9; padding: 9px;\"><strong>DRD<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p><strong>DRD<\/strong> should be selected only when the corresponding telephone company service is enabled. A simple difference in the ringtone melody or volume does not mean that DRD is active on the line.<\/p>\n<h2>How to change the reception mode on OKI MB472<\/h2>\n<p><strong>Where the actions are performed:<\/strong> in the administration menu on the MFP button-based control panel.<\/p>\n<ol>\n<li>Press <strong>SETTING<\/strong>.<\/li>\n<li>Select <strong>Admin Setup<\/strong> and press <strong>OK<\/strong>.<\/li>\n<li>Enter the current administrator password, select <strong>Enter<\/strong>, and press <strong>OK<\/strong>.<\/li>\n<li>Select <strong>User Install<\/strong> and press <strong>OK<\/strong>.<\/li>\n<li>Select <strong>Reception Mode<\/strong> and press <strong>OK<\/strong>.<\/li>\n<li>Select the appropriate mode from the table above.<\/li>\n<li>Press <strong>OK<\/strong> and return to the main screen.<\/li>\n<\/ol>\n<h2>How to change the reception mode on OKI MB492 and MB562<\/h2>\n<p><strong>Where the actions are performed:<\/strong> in the administration menu on the MFP touch panel.<\/p>\n<ol>\n<li>Press <strong>Device Settings<\/strong>.<\/li>\n<li>Switch the screen and press <strong>Admin Setup<\/strong>.<\/li>\n<li>Enter the current administrator name and password and press <strong>OK<\/strong>.<\/li>\n<li>Press <strong>User Install<\/strong>.<\/li>\n<li>Press <strong>Reception Mode<\/strong>.<\/li>\n<li>Select the appropriate mode.<\/li>\n<li>Press <strong>Back<\/strong> until the main screen appears.<\/li>\n<\/ol>\n<div style=\"background-color: #fffbf0; border-left: 5px solid #ff9800; margin: 20px 0; padding: 14px 18px;\">\n<p style=\"margin: 0 0 8px;\"><strong>Telephone mode does not receive faxes automatically<\/strong><\/p>\n<p style=\"margin: 0;\">In <strong>Tel Ready Mode<\/strong>, the incoming call is answered by the user first. When you hear the fax tone, start reception on the MFP by pressing <strong>START<\/strong>. Press <strong>START<\/strong> first and only then hang up the handset.<\/p>\n<\/div>\n<h2>If the fax is received but not printed<\/h2>\n<p><strong>Where the actions are performed:<\/strong> first near the paper tray and on the MFP control panel, and then, if necessary, in the stored documents menu.<\/p>\n<ol>\n<li>Make sure the tray contains paper of the appropriate size.<\/li>\n<li>Clear all paper jam messages.<\/li>\n<li>Check that the covers are closed and that the tray is fully inserted.<\/li>\n<li>For paper used to print received faxes, set the media type to <strong>Plain<\/strong> or <strong>Recycled<\/strong>. Another media type may prevent automatic tray selection.<\/li>\n<li>Print documents stored in confidential boxes or the secure reception area.<\/li>\n<li>Delete unnecessary delayed jobs and documents that no longer need to be stored.<\/li>\n<\/ol>\n<p>Code <strong>14<\/strong> means that there is not enough free memory for a new fax. Clearing a paper jam and loading paper may automatically free memory because the machine will be able to print pages that have already been received.<\/p>\n<p>If automatic delivery of received faxes to email or a shared folder is enabled, the machine may not print them on paper. In that case, check the automatic delivery setting separately.<\/p>\n<h2>Step 6. Disable Super G3 on a poor-quality line or with IP telephony<\/h2>\n<p><strong>Super G3<\/strong> is a high-speed fax communication mode. It is enabled by default and normally works on a good-quality analog line. When transmitting through VoIP, an optical network terminal, some PBXs, or an unstable line, the high-speed mode may fail to negotiate correctly with the remote fax.<\/p>\n<p>Disable <strong>Super G3<\/strong> after checking the cable, number, dialing type, and reception mode. This is especially appropriate for codes <strong>32<\/strong>, <strong>40<\/strong>, <strong>43<\/strong>, <strong>45\u201347<\/strong>, <strong>49<\/strong>, <strong>52<\/strong>, <strong>60<\/strong>, <strong>66\u201369<\/strong>, <strong>6a<\/strong>, <strong>82<\/strong>, and <strong>83<\/strong>.<\/p>\n<h3>OKI MB472<\/h3>\n<p><strong>Where the actions are performed:<\/strong> in the administration menu on the MFP button-based control panel.<\/p>\n<ol>\n<li>Press <strong>SETTING<\/strong>.<\/li>\n<li>Open <strong>Admin Setup<\/strong> and enter the current password.<\/li>\n<li>Select <strong>User Install<\/strong>.<\/li>\n<li>Select <strong>Super G3<\/strong>.<\/li>\n<li>Set it to <strong>Disable<\/strong> and press <strong>OK<\/strong>.<\/li>\n<li>Return to the main screen.<\/li>\n<\/ol>\n<h3>OKI MB492 and MB562<\/h3>\n<p><strong>Where the actions are performed:<\/strong> in the administration menu on the MFP touch panel.<\/p>\n<ol>\n<li>Press <strong>Device Settings<\/strong>.<\/li>\n<li>Press <strong>Admin Setup<\/strong> and log in.<\/li>\n<li>Press <strong>User Install<\/strong>.<\/li>\n<li>Press <strong>Super G3<\/strong>.<\/li>\n<li>Set it to <strong>OFF<\/strong>.<\/li>\n<li>Return to the main screen.<\/li>\n<\/ol>\n<p>After disabling it, transmission may take longer. This is normal: the machine uses a communication mode that is less demanding on the line. Send a one-page test fax and print a new journal.<\/p>\n<h2>Special considerations for ADSL, VoIP, ISDN and optical telephone service<\/h2>\n<ul>\n<li><strong>ADSL:<\/strong> the MFP telephone cable must pass through a working line splitter. Without it, ADSL data can interfere with fax transmission.<\/li>\n<li><strong>VoIP and optical telephone service:<\/strong> connect the MFP&#8217;s <strong>LINE<\/strong> connector to the analog telephone output of the router, optical network terminal, or adapter. The Ethernet connector is not used for this.<\/li>\n<li><strong>Office PBX:<\/strong> connect the extension line to <strong>LINE<\/strong>, enable <strong>PBX Line<\/strong>, and save an outside-line prefix if necessary.<\/li>\n<li><strong>ISDN:<\/strong> the MFP cannot be connected directly to a digital ISDN line. A terminal adapter with an analog telephone output is required.<\/li>\n<\/ul>\n<div style=\"background-color: #fffbf0; border-left: 5px solid #ff9800; margin: 20px 0; padding: 14px 18px;\">\n<p style=\"margin: 0 0 8px;\"><strong>Fax over VoIP may be unstable<\/strong><\/p>\n<p style=\"margin: 0;\">A successful voice call does not guarantee successful fax transmission. Voice compression, packet loss, and telephone equipment settings can distort the fax signal. If the connection is still interrupted after disabling <strong>Super G3<\/strong>, ask your service provider to check fax support on the line being used and the telephone adapter settings.<\/p>\n<\/div>\n<h2>Test reception from another fax machine<\/h2>\n<p><strong>Where the actions are performed:<\/strong> on another working fax machine or using a service that can send a test fax to your number.<\/p>\n<ol>\n<li>Set the OKI to automatic fax reception mode.<\/li>\n<li>Make sure the machine is turned on, there are no errors on the control panel, and paper is loaded in the tray.<\/li>\n<li>Send one page to the OKI number.<\/li>\n<li>Check whether the call arrives and whether the MFP answers.<\/li>\n<li>If the machine answers but transmission is interrupted, print the <strong>Fax Tx\/Rx Journal<\/strong> and check the new code.<\/li>\n<li>If the call does not arrive at all, check the number, the line, the service provider&#8217;s equipment, and incoming call routing in the PBX.<\/li>\n<\/ol>\n<p>If incoming faxes fail only from one sender, ask that sender to resend the document at a lower resolution. It is also useful to test transmission from another fax machine: this helps distinguish an OKI problem from incompatibility or an error on the side of a particular sender.<\/p>\n<h2>When to contact the telephone service provider or a service center<\/h2>\n<p>Contact the telephone service provider or PBX administrator if:<\/p>\n<ul>\n<li>there is no dial tone on the test telephone;<\/li>\n<li>voice calls are interrupted or contain severe noise;<\/li>\n<li>incoming calls do not reach the connector to which the MFP is connected;<\/li>\n<li>faxing fails only through VoIP, a router, or an optical network terminal;<\/li>\n<li>the outside-line prefix, dialing rules, or purpose of the extension line are unknown.<\/li>\n<\/ul>\n<p>The MFP itself requires diagnostics if code <strong>80<\/strong> repeatedly appears or if the machine does not detect a working analog line after it has been tested with another telephone. Before contacting service, write down the model, the code from the journal, how the line is connected, and the result of the test call. This information will help distinguish a fax modem fault from a telephone network problem.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>If your OKI MB472, MB492 or MB562 displays Communication Error, does not send a document, or does not receive an incoming fax, the problem is usually not related to the driver. Check the code in the fax journal, the telephone&hellip;<\/p>\n<p class=\"more-link-p\"><a class=\"more-link\" href=\"https:\/\/drivernew.com\/?p=78727\">Read more &rarr;<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_lmt_disableupdate":"","_lmt_disable":"","footnotes":""},"categories":[36],"tags":[],"class_list":["post-78727","post","type-post","status-publish","format-standard","hentry","category-oki-printer"],"modified_by":"DriverNew","_links":{"self":[{"href":"https:\/\/drivernew.com\/index.php?rest_route=\/wp\/v2\/posts\/78727","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/drivernew.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/drivernew.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/drivernew.com\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/drivernew.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=78727"}],"version-history":[{"count":1,"href":"https:\/\/drivernew.com\/index.php?rest_route=\/wp\/v2\/posts\/78727\/revisions"}],"predecessor-version":[{"id":78728,"href":"https:\/\/drivernew.com\/index.php?rest_route=\/wp\/v2\/posts\/78727\/revisions\/78728"}],"wp:attachment":[{"href":"https:\/\/drivernew.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=78727"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/drivernew.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=78727"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/drivernew.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=78727"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}