{"id":77861,"date":"2026-04-14T10:33:44","date_gmt":"2026-04-14T07:33:44","guid":{"rendered":"https:\/\/drivernew.com\/?p=77861"},"modified":"2026-04-14T10:33:44","modified_gmt":"2026-04-14T07:33:44","slug":"epson-l1250-does-not-print-does-not-connect-over-wi-fi-or-the-lights-are-flashing-what-to-do-in-windows-10-and-windows-11","status":"publish","type":"post","link":"https:\/\/drivernew.com\/?p=77861","title":{"rendered":"Epson L1250 Does Not Print, Does Not Connect over Wi-Fi, or the Lights Are Flashing: What to Do in Windows 10 and Windows 11"},"content":{"rendered":"<p>This guide applies to the Epson L1250 printer.<\/p>\n<h2>When this guide will help<\/h2>\n<ul>\n<li>The driver is installed, but the printer does not print.<\/li>\n<li>A document is sent to print, but no sheet comes out.<\/li>\n<li>Documents remain in the print queue.<\/li>\n<li>Printing over Wi-Fi does not work.<\/li>\n<li>The printer is connected to Wi-Fi, but the computer or phone cannot see it.<\/li>\n<li>The printer prints blank pages.<\/li>\n<li>There are streaks, gaps, or incorrect colors in prints.<\/li>\n<li>The printer prints incorrect characters.<\/li>\n<li>The printer does not pick up paper or shows a paper jam.<\/li>\n<li>The lights on the printer are flashing and it is not clear what that means.<\/li>\n<\/ul>\n<h2>Official ways to check and solve problems<\/h2>\n<h3>If Epson L1250 does not print after driver installation<\/h3>\n<h4>Step 1. Restart the printer and the computer<\/h4>\n<ol>\n<li>Turn the printer off with the power button.<\/li>\n<li>If the printer is connected by USB, <strong>do not disconnect the USB cable<\/strong>. It must remain connected both to the printer and to the computer.<\/li>\n<li>Disconnect only the printer power cable from the outlet for 30 seconds.<\/li>\n<li>Plug the power back in.<\/li>\n<li>Turn the printer on.<\/li>\n<li>Restart the computer.<\/li>\n<\/ol>\n<h4>Step 2. If the printer is connected by USB, connect it directly to the computer<\/h4>\n<ol>\n<li>Make sure the USB cable is firmly connected both to the printer and to the computer.<\/li>\n<li>If the printer is connected through a USB hub or USB splitter, disconnect it.<\/li>\n<li>Connect the printer directly to a USB port on the computer.<\/li>\n<li>If that does not help, move the cable to another USB port.<\/li>\n<li>If you have another USB cable, try it.<\/li>\n<\/ol>\n<h4>Step 3. Make Epson L1250 the default printer<\/h4>\n<p><strong>Windows 11:<\/strong><br \/>\nStart &gt; Settings &gt; Bluetooth &amp; devices &gt; Printers &amp; scanners.<\/p>\n<p><strong>Windows 10:<\/strong><br \/>\nStart &gt; Settings &gt; Devices &gt; Printers &amp; scanners.<\/p>\n<ol>\n<li>Find <strong>Epson L1250<\/strong>.<\/li>\n<li>Open that printer page.<\/li>\n<li>Click <strong>Set as default<\/strong>, if that button is available.<\/li>\n<\/ol>\n<p>If the button is not available, find the switch <strong>Let Windows manage my default printer<\/strong> and turn it off. Then select your Epson again and click <strong>Set as default<\/strong>.<\/p>\n<h4>Step 4. Check whether offline mode is enabled<\/h4>\n<ol>\n<li>Open the print queue window.<\/li>\n<li>At the top of the window, click <strong>Printer<\/strong>.<\/li>\n<li>Make sure <strong>Work Offline<\/strong> and <strong>Pause Printing<\/strong> are turned off.<\/li>\n<\/ol>\n<p>If there is a check mark next to either item, click it to turn that mode off.<\/p>\n<h4>Step 5. Open the print queue and remove everything unnecessary<\/h4>\n<p><strong>Windows 11:<\/strong><br \/>\nStart &gt; Settings &gt; Bluetooth &amp; devices &gt; Printers &amp; scanners &gt; Epson L1250 &gt; <strong>Open print queue<\/strong>.<\/p>\n<p><strong>Windows 10:<\/strong><br \/>\nStart &gt; Settings &gt; Devices &gt; Printers &amp; scanners &gt; Epson L1250 &gt; <strong>Open queue<\/strong>.<\/p>\n<p>After that, a window opens with the list of documents Windows is trying to print.<\/p>\n<ol>\n<li>If documents are listed, delete all of them.<\/li>\n<li>Wait 10 to 15 seconds.<\/li>\n<li>Try printing one simple document.<\/li>\n<\/ol>\n<h4>Step 6. Restart the Windows print service<\/h4>\n<ol>\n<li>Press <strong>Win + R<\/strong>.<\/li>\n<li>Type <strong>services.msc<\/strong>.<\/li>\n<li>Press <strong>Enter<\/strong>.<\/li>\n<li>Find <strong>Print Spooler<\/strong> in the list.<\/li>\n<li>Right-click that entry.<\/li>\n<li>Select <strong>Restart<\/strong>.<\/li>\n<\/ol>\n<h4>Step 7. If the printer is connected by USB, check where Windows is sending the print job<\/h4>\n<ol>\n<li>Press <strong>Win + R<\/strong>.<\/li>\n<li>Type <strong>control printers<\/strong>.<\/li>\n<li>Press <strong>Enter<\/strong>.<\/li>\n<li>In the window that opens, right-click <strong>Epson L1250<\/strong>.<\/li>\n<li>Select <strong>Printer properties<\/strong>.<\/li>\n<li>Open the <strong>Ports<\/strong> tab.<\/li>\n<\/ol>\n<p>For a USB connection, one of these is usually the correct choice:<\/p>\n<ul>\n<li><strong>USB001<\/strong>;<\/li>\n<li><strong>USB002<\/strong>;<\/li>\n<li>or another port labeled <strong>USB Virtual Printer Port<\/strong>.<\/li>\n<\/ul>\n<p>If <strong>LPT1<\/strong> is selected, that is usually the wrong setting for this printer.<\/p>\n<ol>\n<li>Select the correct USB port.<\/li>\n<li>Click <strong>Apply<\/strong>.<\/li>\n<li>Click <strong>OK<\/strong>.<\/li>\n<li>Try printing again.<\/li>\n<\/ol>\n<h4>Step 8. If necessary, remove the printer and add it again<\/h4>\n<p><strong>Windows 11:<\/strong><br \/>\nStart &gt; Settings &gt; Bluetooth &amp; devices &gt; Printers &amp; scanners.<\/p>\n<p><strong>Windows 10:<\/strong><br \/>\nStart &gt; Settings &gt; Devices &gt; Printers &amp; scanners.<\/p>\n<ol>\n<li>Select your Epson.<\/li>\n<li>Click <strong>Remove<\/strong>.<\/li>\n<li>Restart the computer.<\/li>\n<li>Reconnect the printer by USB or set it up again over Wi-Fi.<\/li>\n<li>Add the printer again through <strong>Printers &amp; scanners<\/strong>.<\/li>\n<\/ol>\n<h3>If printing over Wi-Fi does not work<\/h3>\n<ol>\n<li>Make sure the printer is turned on.<\/li>\n<li>Check whether the <strong>Wi-Fi<\/strong> light is on. If it is off, the printer is not connected to the wireless network.<\/li>\n<li>Make sure the computer or phone and the printer are connected to the same Wi-Fi network.<\/li>\n<li>If the router works only on the <strong>5 GHz<\/strong> band, enable <strong>2.4 GHz<\/strong> or <strong>dual band<\/strong> mode.<\/li>\n<li>If the router uses one network name for 2.4 GHz and 5 GHz, give the two bands different names if possible.<\/li>\n<li>Check whether the router has <strong>Privacy Separator<\/strong> or a similar device isolation feature enabled.<\/li>\n<li>Restart the router.<\/li>\n<\/ol>\n<p>If the printer is connected to a new network or a new router, set up the wireless connection again.<\/p>\n<h4>How to connect the printer using WPS<\/h4>\n<ol>\n<li>Press the <strong>WPS<\/strong> button on the router.<\/li>\n<li>Within 2 minutes, press and hold the <strong>Wi-Fi<\/strong> button on the printer for about 5 seconds.<\/li>\n<li>Wait for the connection to finish.<\/li>\n<\/ol>\n<p>If the Wi-Fi light stays on steadily, the connection was successful.<\/p>\n<h4>How to print network information<\/h4>\n<p>Press and hold the <strong>Network Status<\/strong> button for at least 7 seconds to print the network status sheet.<\/p>\n<p>If you release the button earlier, the printer prints the network connection report instead.<\/p>\n<h3>If the printer is connected to Wi-Fi, but the computer or phone cannot see it<\/h3>\n<ol>\n<li>Check the network connection report or the network status sheet.<\/li>\n<li>Make sure the printer is not connected to a guest network.<\/li>\n<li>Check whether the network name contains characters the printer cannot display.<\/li>\n<li>If you changed the router, fully reinstall the printer in Windows or add it again in the phone app.<\/li>\n<li>If the printer cannot be found on the network, reset the network settings and set up Wi-Fi again.<\/li>\n<\/ol>\n<h3>If documents remain in the print queue<\/h3>\n<ol>\n<li>Open the print queue.<\/li>\n<li>Delete all documents from the list.<\/li>\n<li>Restart the <strong>Print Spooler<\/strong> service.<\/li>\n<li>Restart the printer and the computer.<\/li>\n<li>Try printing only one short document again.<\/li>\n<\/ol>\n<p>If the problem repeats, check whether old or extra printer entries remain in Windows. If they do, remove them.<\/p>\n<h3>If the printer prints blank pages<\/h3>\n<ol>\n<li>Make sure the document really contains text or an image.<\/li>\n<li>Check the ink level in the tanks. The level must be above the lower line.<\/li>\n<li>Make sure the correct paper size is selected both in the document and in the print settings.<\/li>\n<li>If the driver has a <strong>Skip Blank Page<\/strong> setting, check whether it is appropriate for your task.<\/li>\n<li>Run a nozzle check.<\/li>\n<li>If the nozzle check shows gaps, run print head cleaning.<\/li>\n<\/ol>\n<p>If there is no improvement after cleaning, you can repeat it once more. If nothing changes after three cleanings in a row, turn the printer off and wait at least 12 hours. Then run the nozzle check again.<\/p>\n<h3>If prints have streaks, gaps, or incorrect colors<\/h3>\n<ol>\n<li>Check the ink level.<\/li>\n<li>Make sure the correct paper type is selected in the print settings.<\/li>\n<li>Check that grayscale printing is not enabled if you need color printing.<\/li>\n<li>Run a nozzle check.<\/li>\n<li>If the nozzle check shows gaps, run print head cleaning.<\/li>\n<li>If the lines still look uneven after cleaning, run print head alignment.<\/li>\n<\/ol>\n<p>If the printer has not been used for a long time and normal cleaning does not help, a deeper cleaning option may be available in the Epson software. Use it only as a last step because it consumes more ink.<\/p>\n<h3>If the printer prints incorrect characters<\/h3>\n<ol>\n<li>Make sure the cables are firmly connected at both ends.<\/li>\n<li>Delete all documents from the print queue.<\/li>\n<li>If the printer is connected through a USB hub, connect it directly to the computer.<\/li>\n<li>If the computer recently woke from sleep mode, send the document to print again.<\/li>\n<li>If the problem remains, try another USB cable.<\/li>\n<li>Make sure the driver window shows <strong>Epson L1250<\/strong> at the top.<\/li>\n<\/ol>\n<h3>If the printer does not pick up paper or shows a paper jam<\/h3>\n<ol>\n<li>Remove all paper from the tray.<\/li>\n<li>Check for wrinkled, damp, or overly thin sheets.<\/li>\n<li>Load the paper again in the center of the rear paper feeder.<\/li>\n<li>Move the edge guide to the edge of the paper.<\/li>\n<li>Make sure the stack is not too high.<\/li>\n<li>Place the printer on a flat surface.<\/li>\n<\/ol>\n<p>If the printer feeds multiple sheets at once:<\/p>\n<ol>\n<li>Remove the paper.<\/li>\n<li>Straighten the edges of the stack slightly.<\/li>\n<li>Load the paper again.<\/li>\n<\/ol>\n<p>If paper is jammed:<\/p>\n<ol>\n<li>Cancel printing on the computer.<\/li>\n<li>Carefully remove the jammed paper completely.<\/li>\n<li>Check that no torn scraps remain inside.<\/li>\n<li>Press <strong>Stop<\/strong> to clear the error.<\/li>\n<\/ol>\n<p>If the paper light keeps flashing, turn the printer off and on again. If the error does not clear, load A4 or Letter paper into the rear paper feeder and press <strong>Stop<\/strong> to try to eject any remaining paper from inside.<\/p>\n<h3>If the printer was just filled with ink for the first time<\/h3>\n<p>After the first fill, the printer charges the print head.<\/p>\n<p>During this process, the power light may flash and the ink light may stay on. Do not turn the printer off until charging is finished.<\/p>\n<p>If the process does not finish within about 20 minutes, turn the printer off, turn it on again, and check whether charging continues. If charging still does not finish, contact support.<\/p>\n<p>If this is not the first fill, such a long process is usually not considered normal. If the printer keeps flashing for a long time, shows an error, or does not print after a normal refill, move to the troubleshooting steps above.<\/p>\n<h3>What the lights mean on Epson L1250<\/h3>\n<ul>\n<li><strong>The power light is on:<\/strong> the printer is turned on.<\/li>\n<li><strong>The power light is flashing:<\/strong> the printer is performing an operation. Wait until the flashing stops before turning the printer off.<\/li>\n<li><strong>The Wi-Fi light is on:<\/strong> the printer is connected to the wireless network.<\/li>\n<li><strong>The Wi-Fi Direct light is on:<\/strong> the printer is connected to a device through Wi-Fi Direct.<\/li>\n<li><strong>The ink light is on:<\/strong> the initial ink charging may not be complete.<\/li>\n<li><strong>The paper light is on:<\/strong> there is no paper or multiple sheets were fed. Load paper and press <strong>Stop<\/strong>.<\/li>\n<li><strong>The paper light is flashing:<\/strong> there may be a paper jam. Remove the paper and press <strong>Stop<\/strong>.<\/li>\n<li><strong>The power, ink, and paper lights are on:<\/strong> the printer may have been turned off incorrectly. Press <strong>Stop<\/strong>, then run a nozzle check and delete all stuck documents from the print queue.<\/li>\n<li><strong>The Wi-Fi and Wi-Fi Direct lights are flashing:<\/strong> a Wi-Fi error occurred. Press <strong>Wi-Fi<\/strong> to clear the error and try again.<\/li>\n<li><strong>The ink and paper lights flash at the same time:<\/strong> the service life of the waste ink pad is near the end or already ended.<\/li>\n<li><strong>The ink and paper lights flash alternately:<\/strong> the service life of the borderless printing pad is near the end or already ended. Borderless printing may become unavailable until the printer is serviced.<\/li>\n<li><strong>The ink, paper, Wi-Fi, and Wi-Fi Direct lights are on:<\/strong> a firmware update error occurred. Connect the printer by USB and try updating the firmware again.<\/li>\n<li><strong>All lights are flashing:<\/strong> there may be paper or packing material inside. Open the front cover, remove anything unnecessary, then turn the printer off and on again.<\/li>\n<\/ul>\n<h3>How to check the printer without a computer<\/h3>\n<ol>\n<li>Turn the printer off.<\/li>\n<li>Load a few sheets of plain paper.<\/li>\n<li>Press and hold <strong>Stop<\/strong>.<\/li>\n<li>Without releasing it, press <strong>Power<\/strong>.<\/li>\n<li>When the printer turns on, release both buttons.<\/li>\n<\/ol>\n<p>The printer should print a test sheet.<\/p>\n<ul>\n<li><strong>The test sheet printed normally.<\/strong> That means the printer itself is working. The problem should be looked for in Windows, the cable, the settings, or the network.<\/li>\n<li><strong>The test sheet has gaps.<\/strong> You need to clean the print head.<\/li>\n<li><strong>The test sheet did not print at all.<\/strong> There may be a printer hardware problem.<\/li>\n<\/ul>\n<h3>How to clean the print head using the button on the printer<\/h3>\n<ol>\n<li>Make sure the printer is not showing an error.<\/li>\n<li>Load a few sheets of plain paper.<\/li>\n<li>Press and hold <strong>Stop<\/strong> for about 5 seconds.<\/li>\n<\/ol>\n<p>Cleaning starts. During cleaning, the power light flashes. Do not turn the printer off until cleaning is complete.<\/p>\n<p>After cleaning, run the nozzle check again. If there is no improvement after three cleanings in a row, turn the printer off and wait at least 12 hours. Then repeat the check.<\/p>\n<h2>Additional user tips<\/h2>\n<p><strong>Important:<\/strong> this section contains unofficial user tips. They often help, but they are not part of Epson\u2019s official instructions. First complete the official checks, and only then move to these options.<\/p>\n<ul>\n<li>If the printer cannot be found over Wi-Fi, temporarily connect the computer or phone specifically to the <strong>2.4 GHz<\/strong> network.<\/li>\n<li>If printing over Wi-Fi works unstably, temporarily disable VPN on the computer.<\/li>\n<li>If the printer disappears after changing the router, remove the old printer entry from Windows and add the device again.<\/li>\n<li>If you use USB, try a rear USB port on the system unit instead of a front one.<\/li>\n<li>If Windows created several similar Epson entries after the connection method changed, keep only one working entry and remove the extra ones.<\/li>\n<li>If the Wi-Fi connection behaves unstably, temporarily test the printer through <strong>Wi-Fi Direct<\/strong>.<\/li>\n<li>If print quality improved after cleaning but gaps still remain, do not run many cleanings in a row. Let the printer sit for a few hours, and only then test again.<\/li>\n<li>If one document gets stuck again and again, first try printing a plain text file. This helps determine whether the problem is with the printer itself or only with one specific program.<\/li>\n<\/ul>\n<h2>When it is better to contact service<\/h2>\n<ul>\n<li>The test sheet will not print at all without a computer.<\/li>\n<li>Print quality does not improve after several cleanings.<\/li>\n<li>The paper light keeps flashing after the jammed paper was removed.<\/li>\n<li>The printer keeps showing an error for a long time after a normal refill.<\/li>\n<li>The waste ink pad related lights are flashing.<\/li>\n<li>Printing still does not work after removing and adding the printer again.<\/li>\n<li>The Wi-Fi error does not disappear even after setting up the network again.<\/li>\n<\/ul>\n<h2>Brief conclusion<\/h2>\n<p>First check the connection type, USB or Wi-Fi, then check the print queue, offline mode, and the default printer in Windows. If that does not help, print a test sheet without a computer. If the problem is related only to the wireless network, start with checking the 2.4 GHz network, the network connection report, and setting up Wi-Fi again.<\/p>\n<div class=\"social-share-buttons\"><a href=\"https:\/\/www.facebook.com\/sharer\/sharer.php?u=https:\/\/drivernew.com\/?p=77861\" target=\"_blank\" rel=\"noopener\">Facebook<\/a><a href=\"https:\/\/twitter.com\/intent\/tweet?url=https:\/\/drivernew.com\/?p=77861&text=Epson+L1250+Does+Not+Print%2C+Does+Not+Connect+over+Wi-Fi%2C+or+the+Lights+Are+Flashing%3A+What+to+Do+in+Windows+10+and+Windows+11\" target=\"_blank\" rel=\"noopener\">Twitter<\/a><a href=\"https:\/\/www.linkedin.com\/shareArticle?url=https:\/\/drivernew.com\/?p=77861&title=Epson+L1250+Does+Not+Print%2C+Does+Not+Connect+over+Wi-Fi%2C+or+the+Lights+Are+Flashing%3A+What+to+Do+in+Windows+10+and+Windows+11\" target=\"_blank\" rel=\"noopener\">LinkedIn<\/a><a href=\"https:\/\/pinterest.com\/pin\/create\/button\/?url=https:\/\/drivernew.com\/?p=77861&description=Epson+L1250+Does+Not+Print%2C+Does+Not+Connect+over+Wi-Fi%2C+or+the+Lights+Are+Flashing%3A+What+to+Do+in+Windows+10+and+Windows+11\" target=\"_blank\" rel=\"noopener\">Pinterest<\/a><\/div>","protected":false},"excerpt":{"rendered":"<p>This guide applies to the Epson L1250 printer. When this guide will help The driver is installed, but the printer does not print. A document is sent to print, but no sheet comes out. Documents remain in the print queue.&hellip;<\/p>\n<p class=\"more-link-p\"><a class=\"more-link\" href=\"https:\/\/drivernew.com\/?p=77861\">Read more &rarr;<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_lmt_disableupdate":"","_lmt_disable":"","footnotes":""},"categories":[4],"tags":[],"class_list":["post-77861","post","type-post","status-publish","format-standard","hentry","category-epson"],"modified_by":"DriverNew","_links":{"self":[{"href":"https:\/\/drivernew.com\/index.php?rest_route=\/wp\/v2\/posts\/77861","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/drivernew.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/drivernew.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/drivernew.com\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/drivernew.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=77861"}],"version-history":[{"count":1,"href":"https:\/\/drivernew.com\/index.php?rest_route=\/wp\/v2\/posts\/77861\/revisions"}],"predecessor-version":[{"id":77862,"href":"https:\/\/drivernew.com\/index.php?rest_route=\/wp\/v2\/posts\/77861\/revisions\/77862"}],"wp:attachment":[{"href":"https:\/\/drivernew.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=77861"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/drivernew.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=77861"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/drivernew.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=77861"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}