Questions and answers

This article only applies to: Windows 7

Last Updated on 25.02.2017 by DriverNew

Calibration of the touch screen is necessary when your touch screen responds inaccurate or erratic.

Use the following steps to calibrate your touch screen in Windows 7:

  1. Click Start and then Control Panel, and next Hardware and Sound.
  2. Under Tablet PC Settings, tap Calibrate the screen for pen or touch input.
  3. On the Display tab, under Display options, tap Calibrate and then Yes to allow the program to make changes.
  4. Follow the on-screen instructions to calibrate your touch screen.

The Tablet PC Settings are only available when your touch screen is properly detected. If the option is not visible, ensure that the USB cable is connected to your PC in case of an external touch screen display.

If calibration does not resolve your problem, tap Reset Calibration data under Display options on the Display tab. This will remove all previous calibration data and reset your monitor display back to default settings.

Additional Information

If you don't know how to connect an additional device to your computer and need instructions on how to connect it correctly, you can use the search bar on this site (located at the top right of any page) or write to us.

To use any computer device, software (driver) is required. It is recommended to use the original software included with the device. If you don't have the software and can't find it on the device manufacturer's website, we can help. Tell us the model of your printer, scanner, monitor or other computer device, as well as the operating system version (for example: Windows 11, Windows 10, Windows 8, etc.).

Find operating system info in Windows 11

Find operating system info in Windows 11

Under Windows specifications, check which edition and version of Windows your device is running.

How to find out what version of the operating system is installed on your Mac device. From the Apple menu in the top left corner of your screen, select About This Mac. You should see the macOS name, such as macOS Sonoma, followed by the version number. If you need to know the build number as well, click the version number to see it.

install driverHow to install the driver if there is no setup.exe file and how to install the driver using the .INF file. In this case, open the downloaded file that should contain the driver and use the .INF file to install. In this article, we will tell and show you how to install a driver using an .INF file.
software for computerEssential software for any computer - If you bought a new computer or reinstalled the operating system, then on this page of the site you will find all the necessary software and instructions for installing it. Software for computers with the Windows operating system.
Scanner softwareIf you can’t find scanner software or don’t know how to use your scanner to scan documents and photos. This problem occurs because some scanners and multifunction devices only have drivers, but do not have dedicated software to control the scanner.

Leave a Reply

Your email address will not be published. Required fields are marked *